Application of holographic interferometry in the analysis of stress states in a crack root area
Authors:
- Peter FrankovskýPFPeter Frankovský
- Zuzana BrodnianskáZuzana Brodnianská
- Jozef BockoJBJozef Bocko
- Marianna TrebuňováMTMarianna Trebuňová
- Ján KostkaJKJán Kostka
- Michal KickoMKMichal Kicko
- Peter ČarákPČPeter Čarák
- 19 March 2020
- journal article
- research article
- Published by Optica Publishing Group in Applied Optics
- Vol. 59 (13) , D170-D178
Abstract
This paper deals with the visualization and analysis of interaction of a cutting wedge disintegrator with plastic at low loads. For exploratory research, a contactless optical holographic interferometry method was used, allowing a comprehensive picture of the stress state when opening microcracks. An experimental model was set up for the purposes of the research. The structure of the model as well as its geometric parameters had to comply with the applied optical method. The method of holographic interferometry enabled us to record even the initial stages of the crack. Pictures of holographic interferograms allowed us to observe stress fields on the cutting wedge as well as on the loaded body in the form of interference fringes. In order to record the interferograms, we used the method of two exposures so that we gained double-exposure interferograms, which represent the state of the object during the second exposure. The first exposure was caused by superposition of object-related and reference wave after the object was subjected to a load; the second exposure occurred after the load was removed. We used quantitative analysis to determine stress intensity coefficients from holographic interferograms as followed by the calculation of stresses with respect to axes x and y . The analysis was done for loading forces 1.57 N and 3.14 N. As the load applied to the cutting material was increasing, the density of interference fringes was increasing, too.Keywords
Funding Information
- Agentúra Ministerstva Školstva, Vedy, Výskumu a Športu SR (APVV-17-0258, VEGA 1/0290/18, KEGA 023TUKE-4/2020, VEGA 1/0086/18, APVV 15-0435)
This publication has 20 references indexed in Scilit:
- Modeling of surface cracks in rolling contactMaterials Science and Engineering: A, 2012
- Modeling and Experimental Analysis of the Aluminium Alloy Fatigue Damage in the case of Bending – Torsion LoadingProcedia Engineering, 2012
- Methods and Applications of Optical HolographyMaterials Science, 2011
- Stress state and stress-intensity coefficients in structures with crack-like defects by holographic interferometryRussian Engineering Research, 2009
- The influence of pre-existing dislocations on cleavage crack propagation behavior in crystalsJournal of the Mechanics and Physics of Solids, 1997
- Holographic investigation of brittle crack propagation in plastic pipesOptics and Lasers in Engineering, 1996
- Fracture mechanics of functionally graded materialsComposites Engineering, 1995
- Effects of Crack Surface Heat Conductance on Stress Intensity FactorsJournal of Applied Mechanics, 1990
- Photoelastic determination of mode i stress intensity factor in tensile strips—effect of crack lengthEngineering Fracture Mechanics, 1984
- The determination of mode I stress-intensity factors by holographic interferometryExperimental Mechanics, 1973