An eddy current sensor for conductor inspection on energized power lines
Author:
- 1 October 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
This paper describes an eddy current sensor carried by a corrosion detection robot that operates on energized power lines. The robot is installed on a live overhead conductor and it is controlled by the ground-based operator using a portable computer and a radio link. The sensor carried by the robot is capable of detecting the remaining thickness of the zinc layer over the steel wires that make the core of the aluminum conductor steel reinforced (ACSR) commonly used in power lines. The sensor is made of a contactless coil that encircles the conductor and applies an alternating longitudinal magnetic field along the conductor. This field induces eddy currents in the zinc layer that changes the coil impedance, which is used to obtain the zinc layer thickness. The main sensor characteristics are described in this paper, such as its immunity to the load current, its enhanced sensibility due to a hybrid circuit, and its contactless coils that facilitates the sensor installation on the power line conductor.Keywords
This publication has 10 references indexed in Scilit:
- Lightning protection of a smart grid sensorElectric Power Systems Research, 2015
- A Simple Formula for Calculating the Coating Thickness of Galvanized Steel WiresIEEE Transactions on Magnetics, 2014
- Detecting broken strands in transmission line - Part 1: Design of a smart eddy current transducer carried by inspection robotInternational Transactions on Electrical Energy Systems, 2012
- Eddy Current Probe Signals Due to a Crack at a Right-Angled CornerIEEE Transactions on Magnetics, 2012
- An Application of Solenoid Sensor for Inspecting Deterioration of ACSR Conductors Due to Forest FiresIEEE Power Engineering Review, 2001
- Electrical and Magnetic Methods of Non-destructive Testing1997
- Electromagnetic induction method for detecting and locating flaws on overhead transmission linesIEEE Transactions on Power Delivery, 1990
- The measurement of corrosion in overhead power linesAnti-Corrosion Methods and Materials, 1988
- Electromagnetic Nondestructive Testing of Cylindrically Layered ConductorsIEEE Transactions on Instrumentation and Measurement, 1979
- The Electromagnetic Basis for Nondestructive Testing of Cylindrical ConductorsIEEE Transactions on Instrumentation and Measurement, 1978