A Numerical Investigation of the Thermal Behavior of Different Phase Change Materials in Thermal Energy Storage Systems
Author:
Preprint
- 16 October 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
Phase change materials (PCM) are widely used in thermal energy storage systems due to their high heat storage properties. However, due to the low thermal conductivity of PCMs, different surface areas are employed in order to increase the amount of energy. One of these methods is to use fins with high thermal conductivity. This study numerically investigated the thermal behavior of different PCMs (paraffin, paraffin wax, polyethylene glycol 6000) during the melting process in a thermal energy storage system with 15 fins. A FOX 50 heat flow meter was used for thermal conductivity measurements of these PCMs, and TA DSC Q200 (Differential Scanning Calorimetry) devices were used for specific heat measurements. The thermal property data of these measured PCMs were used in a time-dependent analysis. With the PCM data obtained, time-dependent thermal analyses were carried out using the Ansys-Fluent program based on the Computational Fluid Dynamics (CFD) method. The effect of these different PCMs on the melting processes was investigated by using water at 75 o C in a 15-fin thermal storage system by observing their thermal behavior in the thermal energy storage system. In addition, cost analyses were conducted by determining the required amount of PCMs for the thermal storage system.Keywords
All Related Versions
This publication has 18 references indexed in Scilit:
- Melting performance enhancement of a phase change material using branched fins and nanoparticles for energy storage applicationsJournal of Energy Storage, 2021
- The influence of external temperature and convective heat exchange with an environment on heat transfer inside phase change material embedded brickJournal of Energy Storage, 2021
- Optical and thermal performance of glazing units containing PCM in buildings: A reviewConstruction and Building Materials, 2020
- Indoor thermal comfort assessment using different constructive solutions incorporating PCMApplied Energy, 2017
- Establishment and experimental verification of TRNSYS model for PCM floor coupled with solar water heating systemEnergy and Buildings, 2017
- PCM thermal storage system for ‘free’ heating and cooling of buildingsEnergy and Buildings, 2015
- Numerical study of PCM solidification in a finned tube thermal storage including natural convectionApplied Thermal Engineering, 2015
- Review of thermal energy storage technologies based on PCM application in buildingsEnergy and Buildings, 2013
- Enhance heat transfer for PCM melting in triplex tube with internal–external finsEnergy Conversion and Management, 2013
- Effects of the number and distribution of fins on the storage characteristics of a cylindrical latent heat energy storage system: a numerical studyHeat and Mass Transfer, 2012