Instrumental platform for the static alignment of lower limb prostheses
- 19 November 2019
- journal article
- research article
- Published by Taylor & Francis in Instrumentation Science & Technology
- Vol. 48 (3) , 231-241
Abstract
The quality of the alignment and adjustment of lower limb prostheses is fundamental in the rehabilitation process, mainly because it contributes to preventing the prostheses from being abandoned. Prosthesis alignment is often performed subjectively based on the experience and knowledge of the healthcare professional. In this work, we present the development of a referenced static alignment equipment for lower limb prostheses. The equipment has an instrumental platform that measures important parameters for suitable alignment of lower limb prostheses, giving the therapist objective data that allow for the best adjustment and alignment of the prosthesis to the individual. The developed system has a novel procedure in the prosthesis adjustment where through a movable base. The prosthesis length can be adjusted with a smooth displacement of 0.35 mm. This minimum displacement is important because the difficulty is greater when the longitudinal adjustment required in the prosthesis is less than 10 mm. The equipment can measure the individual’s center of pressure (COP) in the anteroposterior (AP) and mediolateral (ML) directions, making it possible to adjust the knee and ankle angulation of the prosthesis, and also the alignment in the frontal plane between the healthy and the prosthetic lower limb. The measurement weight accuracy was less than 1%, while the COP measurement accuracies were found to be less than 0.4 cm in both the AP and ML directions. With a sampling frequency of 80 Hz, it is possible to carry out stabilometry analysis and use these data to improve the prosthesis adjustment procedure.Keywords
This publication has 19 references indexed in Scilit:
- Access to prosthetic devices in developing countries: Pathways and challenges2015
- The test–retest reliability of centre of pressure measures in bipedal static task conditions – A systematic review of the literatureGait & Posture, 2010
- Major lower limb amputation – what, why and how to achieve the best resultsOrthopaedics and Trauma, 2010
- Amputation and rehabilitationSurgery (Oxford), 2010
- Appropriateness of plantar pressure measurement devices: A comparative technical assessmentGait & Posture, 2010
- Centre of pressure in dynamic posturography: a comparison among systems based on a pressure matrix and a force platformMeasurement Science and Technology, 2009
- Assistive Technology in Low-Income Countries2009
- Review of secondary physical conditions associated with lower-limb amputation and long-term prosthesis useJournal of Rehabilitation Research and Development, 2008
- Energy expenditure and biomechanical characteristics of lower limb amputee gait:Gait & Posture, 2002
- Alignment procedure for the optimal fitting of lower limb prosthesesJournal of Biomedical Engineering, 1986