Nonsway Model for Lateral Torsional Buckling of Wooden Beams under Wind Uplift
- 1 December 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 142 (12)
Abstract
Simply supported wooden beams nailed to deck boards subjected to wind uplift forces are subjected to compressive stresses at their bottom fibers. Because the restraining action provided by decking is at the top fibers, it is unclear to what extent such restraints are effective in controlling lateral torsional buckling as a possible mode of failure under wind uplift. Present design standards do not have provisions for such cases. Thus, the present study aims to quantify the effect of restraints provided by the deck boards on the lateral torsional buckling capacity of twin-beam-deck systems under wind uplift. Toward this goal, a series of analytical and numerical models were formulated. All models capture the continuous rigid lateral restraint and partial twisting restraint provided by the deck boards. The effects of load type and load position were investigated. The bending stiffness of deck boards was observed to have a significant influence on the lateral torsional buckling capacity of twin-beam-...Keywords
This publication has 28 references indexed in Scilit:
- Laterally braced wood beam-columns subjected to biaxial eccentric loadingComputers & Structures, 2009
- Elastic flexural–torsional buckling of steel beams with rigid and continuous lateral restraintsJournal of Constructional Steel Research, 2007
- Influence of lateral restraint on lateral-torsional buckling of cold-formed steel purlinsThin-Walled Structures, 2005
- Lateral-torsion buckling analysis of partial-laterally restrained thin-walled channel-section beamsJournal of Constructional Steel Research, 2004
- Lateral–torsional buckling of cold-formed zed-purlins partial-laterally restrained by metal sheetingThin-Walled Structures, 2004
- Lateral–torsional buckling of prismatic beams with continuous top-flange bracingJournal of Constructional Steel Research, 2004
- Buckling behavior of cold-formed zed-purlins partially restrained by steel sheetingThin-Walled Structures, 2002
- Modelling of cold-formed purlin-sheeting systems—Part 2. Simplified modelThin-Walled Structures, 1997
- Modelling of cold-formed purlin-sheeting systems— Part 1: Full modelThin-Walled Structures, 1997
- Bracing Requirements for Lateral StabilityJournal of Structural Engineering, 1984