Cure kinetics of aqueous phenol‐formaldehyde resins used for oriented strandboard manufacturing: Effect of wood flour
- 29 August 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 102 (4) , 3774-3781
Abstract
The effect of wood flour on the cure kinetics of commercial phenol‐formaldehyde resins used as oriented strandboard face and core adhesives was studied using differential scanning calorimetry. The wood flour did not change the cure mechanism of the face resin, but lowered its cure temperature and activation energy and increased its cure reaction order. For the core resin (CR), the wood flour lowered the onset cure temperature, and caused separation of the addition and condensation reactions involved in curing of CR. Compared with neat CR, the addition reaction of CR/wood mixture also followed an nth‐order reaction mechanism but with a lower reaction order, while the condensation was changed from an autocatalytic reaction to an nth‐order one. The addition reaction happened at temperatures lower than 90°C, and the condensation reaction was dominant at temperatures higher than 110°C. The proposed models fitted the experimental data well. Relationships among cure reaction conversion (cure degree), cure temperature, and cure time were predicted. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3774–3781, 2006Keywords
This publication has 20 references indexed in Scilit:
- Effect of wood on the curing behavior of commercial phenolic resin systemsJournal of Applied Polymer Science, 2004
- Curing kinetics of phenol formaldehyde resin and wood-resin interactions in the presence of wood substratesWood Science and Technology, 2004
- Lignocellulosic substrates influence on TTT and CHT curing diagrams of polycondensation resinsJournal of Applied Polymer Science, 1999
- Curing conditions effects on the characteristics of thermosetting adhesives-bonded wood joints — Part 1: Substrate influence on TTT and CHT curing diagrams of wood adhesivesEuropean Journal of Wood and Wood Products, 1998
- Curing Property and Plywood Adhesive Performance of Resol-Type Phenol-Urea-Formaldehyde Cocondensed ResinsHolzforschung, 1995
- Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bondingJournal of Applied Polymer Science, 1994
- Completion of alkaline cure acceleration of phenol–formaldehyde resins: Acceleration by organic anhydridesJournal of Applied Polymer Science, 1994
- Phenol–formaldehyde resin curing and bonding in steam-injection pressing. I. Resin synthesis, characterization, and cure behaviorJournal of Applied Polymer Science, 1991
- Anionic living polymerization of 4-vinyl(N,N-diisopropylbenzamide)Polymer, 1986
- Differential scanning calorimetry of phenol–formaldehyde resolsJournal of Applied Polymer Science, 1985