Corrosion Behavior of a New Developed Ferritic Stainless Steels Used in Automobile Exhaust System
Authors:
- 12 January 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 89-91, 102-106
Abstract
The inside corrosion of failed automotive mufflers collected in China was investigated and the composition of the automotive exhaust gas condensate collected from HONGQI automobile was analyzed. According to the analyzed result of collected condensate’s composition, the corrosion resistance of a new designed high Cr stainless steel (B439M) bearing Nb and Ti and a low Cr T409L stainless steel were studied with a condensate corrosion test method which simulates the inside corrosion of automotive mufflers. The life of the two materials was estimated by extreme value analysis of the maximum corrosion depth obtained by the dip dry test (DDT). The life of type B439M steel was 1.6 times as long as that of type T409L steel. To clarify the corrosive process of the simulated condensate test, the electron work function (EWF) on the two stainless steels’ surface was evaluated. It was demonstrated that the surface of new designed stainless steel exhibited markedly improved resistances to corrosion during a simulated condensate test cycle and the corrosive process of simulated condensate test was evaluated and discussed.Keywords
This publication has 11 references indexed in Scilit:
- Nanocrystallization effect on the surface electron work function of copper and its corrosion behaviourPhilosophical Magazine Letters, 2008
- Influence of surface morphology on corrosion and electronic behaviorActa Materialia, 2006
- Electrochemical behaviour of passive films on molybdenum-containing austenitic stainless steels in aqueous solutionsElectrochimica Acta, 2004
- Simulation of road salt corrosion in austenitic alloys for automotive exhaust systemsMaterials at High Temperatures, 2003
- The initiation mechanism of corrosion of zinc by sodium chloride particle depositionCorrosion Science, 2002
- Measurements and analysis of surface potential change during wear of single-crystal silicon (100) at ultralow loads using Kelvin probe microscopyApplied Surface Science, 2000
- Tribological behavior of nanocrystalline zinc oxide filmsWear, 1997
- Effect of Nb on high-temperature properties for ferritic stainless steelScripta Materialia, 1996
- Surface Composition of Stainless Steels during Anodic Dissolution and Passivation Studied by ESCAJournal of the Electrochemical Society, 1985
- Breakdown of tin passivity in aqueous sodium stannate solutionBritish Corrosion Journal, 1985