Cogging Torque Calculation for IPM Having Single Layer Based on Magnetic Circuit Model
Authors:
- 29 May 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 50 (10) , 1-4
Abstract
This research shows that it is possible and effective to predict the cogging torque waveform of the interior permanent magnet (IPM) machine using only an analytical model. Based on the proposed virtual permanent magnet (PM) concept, IPM can be considered as surface PM having zero height and unit relative permeability, and then it is used for calculating the cogging torque with conventional technique. Among the evaluation methods for cogging torque, lateral force method, which is based on lateral force acting on stator teeth, is selected. For the validation of proposed concept, finite element analysis is used. From the analysis results, it is shown that our new proposed concept presents good performance in terms of optimal position of peak cogging torque, cogging torque waveform, and the peak value. Therefore, the proposed concept can be useful in design of IPM requiring several computation processes.Keywords
This publication has 12 references indexed in Scilit:
- Permanent-Magnet Minimization in PM-Assisted Synchronous Reluctance Motors for Wide Speed RangeIEEE Transactions on Industry Applications, 2012
- Review of Design Solutions for Internal Permanent-Magnet Machines Cogging Torque ReductionIEEE Transactions on Magnetics, 2012
- Investigation of Torque–Speed Characteristics and Cogging Torque of Fractional-Slot IPM Brushless AC Machines Having Alternate Slot OpeningsIEEE Transactions on Industry Applications, 2012
- Topology Optimization of the Stator for Minimizing Cogging Torque of IPM MotorsIEEE Transactions on Magnetics, 2011
- Analytical Modeling of Open-Circuit Air-Gap Field Distributions in Multisegment and Multilayer Interior Permanent-Magnet MachinesIEEE Transactions on Magnetics, 2009
- Permanent-Magnet Synchronous Motor Magnet Designs With Skewing for Torque Ripple and Cogging Torque ReductionIEEE Transactions on Industry Applications, 2009
- Characterization of Noise and Vibration Sources in Interior Permanent-Magnet Brushless DC MotorsIEEE Transactions on Magnetics, 2004
- A saturating lumped-parameter model for an interior PM synchronous machineIEEE Transactions on Industry Applications, 2002
- Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motorsIEEE Transactions on Magnetics, 2001
- Analytical prediction of the cogging torque in radial-field permanent magnet brushless motorsIEEE Transactions on Magnetics, 1992