A literature review of asphaltene entity, precipitation, and deposition, introducing recently models of deposition in the well column
Authors:
- Mahdi Zeinali HasanvandMHMahdi Zeinali Hasanvand
- Mostafa MontazeriMMMostafa Montazeri
Open Access
- 26 June 2018
- journal article
- review article
- Published by Ology Journals Kft in Journal of Oil, Gas and Petrochemical Sciences
- Vol. 1 (2) , 83-89
Abstract
Organic precipitations are highly sticky and hard if some asphaltenes are present. This causes a deposition problem to occur when thermodynamic conditions are suitable for sedimentation in a wide range of production processes. This range may start from the porous media around the oil well and continue to the production pipes. Asphaltene exists in many light and heavy oil reservoirs, which often causes problems in the process of crude oil production. Asphaltenes have up to hundreds of carbon molecules in its structure which will be precipitated as a result of natural pressure drop, temperature changes and oil composition changes. In natural depletion, the main cause of asphaltene precipitation is the reduction of pressure. Due to the process of oil production from the well, which is accompanied by simultaneous reduction of pressure and temperature, this molecule is deposited to the tube wall during three stages of precipitation, growth and deposition, and causes flow obstruction. The precipitated asphaltene generated in the process of oil production from the reservoir closes the well and transmission lines. In the process of exploitation, the chock valves, separators, and other equipment in the way are blocked and broken. In refineries and petrochemicals, the presence of even small amounts of asphaltene results in a significant drop in the efficiency of catalysts and other additives. Therefore, before the reactions are performed, attempts are made to remove as much of these materials as possible from oil. In this paper, scientific literature related to the chemical structure and thermodynamic behavior of the asphaltene molecule has been investigated in order to provide clear overviews of the asphaltene precipitation and deposition, and the procesKeywords
This publication has 24 references indexed in Scilit:
- New Two-Dimensional Particle-Scale Model To Simulate Asphaltene Deposition in Wellbores and PipelinesEnergy & Fuels, 2017
- Toward the Asphaltene Structure by Electron Paramagnetic Resonance Relaxation Studies at High Fields (3.4 T)Energy & Fuels, 2016
- Evaluation and comparison of different models for asphaltene particle deposition in flow streamsJournal of Petroleum Science and Engineering, 2012
- Modeling of asphaltene deposition in a production tubingAIChE Journal, 2011
- Monitoring of asphaltene precipitation: Experimental and modeling studyJournal of Petroleum Science and Engineering, 2011
- Heavy-organic particle deposition from petroleum fluid flow in oil wells and pipelinesPetroleum Science, 2010
- Characterization of Heavy Hydrocarbons by Chromatographic and Mass Spectrometric Methods: An OverviewEnergy & Fuels, 2007
- Modeling Asphaltene Deposition in Production PipelinesEnergy & Fuels, 2006
- Precipitation of asphaltenes from solvent-diluted heavy oil and thermodynamic properties of solvent-diluted heavy oil solutionsFuel, 2006
- A sub layer model for the deposition of particles from a turbulent flowChemical Engineering Science, 1975