Membrane-based downhole oil–water separation (DOWS) technology: an alternative to hydrocyclone-based DOWS
Authors:
Open Access
- 24 February 2020
- journal article
- review article
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 10 (5) , 2079-2088
Abstract
Produced water handling has become one of the central concerns for the oil and gas industry today. Produce water (water cut) increases as the field grows old, which brings the additional handling cost to the project. The additional expense could be in terms of lifting cost, treatment, maintenance, tubular scaling, corrosion problems, bacteria, naturally occurring radioactive material and environmental regulations, etc. To address this problem, the hydrocarbon industry developed the downhole oil–water separation (DOWS) technology in the 1990s. In spite of having such cost-effective and environment-friendly solutions, the industry has limited sites using this technique. Thus, there is uttermost need to evaluate the problems in practicality of the current hydrocyclone-based and gravity-based DOWS and find a reliable solution to it. The membrane-based separation methodology represents the coherent solution to robust the downhole separation system that does not require any moveable equipment with advance sensors and mechanical tools. If the reservoir is well characterized and a reliable simulation model is built, it is possible to predict the optimal time for the placement of a specific length of membrane in the well depending on the layer concerned and inclination of the well. Apart from designing the thin and porous hydrophobic and oleophilic membranes, there are plenty of field challenges which have put constraints on the practicality of membrane-based DOWS. The major constraints are durable range of separation pressure, fouling, separation process design, membrane-shear durability. The objective of this study is to present a novel model of PTFE (polytetrafluoroethylene) membrane-based downhole oil–water separation system with its over all functionality and addresses the constraints mentioned above with promising existing working solutions. Moreover, the study also literature reviews and compares the expenditure and maintenance involved in manufacturing, installation, operating and maintenance of system, between the conventional hydrocyclone-based downhole water separation and the proposed (PTFE) membrane-based DOWS.Keywords
This publication has 29 references indexed in Scilit:
- In situ cross-linked superwetting nanofibrous membranes for ultrafast oil–water separationJournal of Materials Chemistry A, 2014
- Formation and characterization of polytetrafluoroethylene nanofiber membranes for vacuum membrane distillationJournal of Membrane Science, 2014
- Engineering superhydrophobic surface on poly(vinylidene fluoride) nanofiber membranes for direct contact membrane distillationJournal of Membrane Science, 2013
- Recent advances in designing superhydrophobic surfacesJournal of Colloid and Interface Science, 2013
- Superhydrophobic electrospun nanofibersJournal of Materials Chemistry A, 2012
- Review of technologies for oil and gas produced water treatmentJournal of Hazardous Materials, 2009
- Fabrication of ultrafine fibrous polytetrafluoroethylene porous membranes by electrospinningJournal of Materials Research, 2009
- Superhydrophobic electrosprayed PTFESurface and Coatings Technology, 2007
- Fouling of Reverse Osmosis and Ultrafiltration Membranes: A Critical ReviewSeparation Science and Technology, 2005
- Chemical and physical aspects of natural organic matter (NOM) fouling of nanofiltration membranesJournal of Membrane Science, 1997