Influence of Soft Phase and Carbon Nanotube Content on the Properties of Hierarchical AZ61 Matrix Composite with Isolated Soft Phase
Open Access
- 21 August 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2877
Abstract
Carbon nanotube-reinforced magnesium matrix (CNTs/Mg) composite has great application potential in the transportation industry, but the trade-off between strength and ductility inhibits its widespread application. In order to balance the strength and plasticity of the composite, in this work, on the basis of the AZ61 matrix composite homogeneously reinforced by Ni-coated CNTs (hard phase), 30 vol.% large-size AZ61 particles are introduced as an isolated soft phase to fabricate hierarchical CNTs/AZ61 composites. The compression tests show the fracture strain and compressive strength of this composite increases by 54% and 8%, respectively, compared with homogeneous CNTs/AZ61 composite. During deformation, the hard phase is mainly responsible for bearing the load and bringing high strength, due to the precipitation of the Mg17Al12 phase, uniformly dispersed CNT and strong interfacial bonding of the CNTs/Mg interface through nickel plating and interfacial chemical reaction. Furthermore, the toughening of the soft phase results in high ductility. With the increase in CNT content, the compressive strength of composites is nearly unchanged but the fracture strain gradually decreases due to the stress concentration of CNT and its agglomeration.Keywords
Funding Information
- Natural Science Foundation of Henan Province, China (202300410487)
This publication has 21 references indexed in Scilit:
- High performance heterogeneous magnesium-based nanocompositeMaterials Letters, 2015
- Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesiumJournal of Alloys and Compounds, 2014
- Enhanced compressive response of hybrid Mg–CNT nano-compositesJournal of Materials Science, 2011
- Addition of CNTs to enhance tensile/compressive response of magnesium alloy ZK60AComposites Part A: Applied Science and Manufacturing, 2011
- DEFECT–DEFECT INTERACTION IN SINGLE-WALLED CARBON NANOTUBES UNDER TORSIONAL LOADINGInternational Journal of Modern Physics B, 2010
- Influence of fibre taper on the work of fibre pull-out in short fibre composite fractureJournal of Materials Science, 2010
- On defect interactions in axially loaded single-walled carbon nanotubesJournal of Applied Physics, 2008
- Effect of particulate size of Al2O3 reinforcement on microstructure and mechanical behavior of solidification processed elemental MgJournal of Alloys and Compounds, 2006
- The effect of MgNi2 intermetallic compound on nanostructurization and amorphization of Mg–Ni alloys processed by controlled mechanical millingJournal of Alloys and Compounds, 2003
- Mechanical alloying and millingProgress in Materials Science, 2001