Evaluation of Non-Autoclaved Aerated Concrete for Energy Behaviors of a Residential House in Nur-Sultan, Kazakhstan
Open Access
Abstract
Autoclaved aerated concrete (AAC) is commonly used as a modern, energy-efficient construction material in Nur-Sultan, Kazakhstan—the second-coldest national capital in the world after Ulaanbaatar, Mongolia. The autoclave curing method used to manufacture the AAC has potential risks and is environmentally costly because of its high-pressure and -temperature operation. Therefore, for phase I and II studies, non-autoclaved aerated concrete (NAAC) was cast, and its properties were evaluated in terms of compressive strength, density, porosity, and thermal conductivity. Moreover, the thermal conductivity prediction model of NAAC was successfully developed. In this Phase III study, the energy behavior of the NAAC was evaluated by energy simulation for a typical two-story residential house model in Kazakhstan. Different wall materials, such as fired brick and normal concrete, were adapted to compare the energy performance of NAAC. Finally, the annual heat loss and amount of heat transferred through the wall of the house were calculated to cross-check the energy-saving effect of NAAC. It was found that the NAAC conserved energy, because the heating and cooling loads, annual heat loss, and amount of heat transfer of NACC were lower than those of fired brick and normal concrete.Keywords
Funding Information
- Nazarbayev University (021220FD1351)
This publication has 19 references indexed in Scilit:
- Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical propertiesJournal of the European Ceramic Society, 2015
- Improving the energy efficiency in buildings while reducing the waste using autoclaved aerated concrete made from power industry wasteEnergy and Buildings, 2013
- Comparison of experimental and theoretical results for the transient heat flow through multilayer walls and flat roofsEnergy, 2008
- Comparison of the Summer Thermal Performance of Three Test Buildings with that Predicted by the Admittance ProcedureArchitectural Science Review, 2008
- A systematic methodology for optimising the energy performance of buildings in BahrainEnergy and Buildings, 2008
- Utilising unprocessed low-lime coal fly ash in foamed concreteFuel, 2005
- Permeable Porosity and Thermal Conductivity of Construction MaterialsJournal of Materials in Civil Engineering, 2004
- Adaptive thermal comfort and sustainable thermal standards for buildingsEnergy and Buildings, 2002
- Structure and properties of aerated concrete: a reviewCement and Concrete Composites, 2000
- Thermal Inertia Properties of Autoclaved Aerated ConcreteJournal of Energy Engineering, 1999