Low-threshold surface-emitting laser diodes with distributed Bragg reflectors and current blocking layers
Authors:
- 24 September 1990
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 57 (13) , 1289-1291
Abstract
AlGaAs/GaAs surface‐emitting laser diodes (SELDs) with distributed Bragg reflectors (DBRs) and current blocking layers are fabricated with the combination of a two‐step epitaxial growth and the reactive ion beam etching (RIBE) technique. An Al0.1Ga0.9As/Al0.7Ga0.3As multilayer and an amorphous silicon (a‐Si)/silicon dioxide (SiO2) multilayer are employed for the lower and upper mirrors, respectively. The active region has a 5×5 μm or 4 μm φ area and a 0.8 μm thickness. The minimum threshold current is 3.3 mA under pulsed condition and 4.1 mA under continuous wave (cw) operation at 12 °C with junction‐side‐up configuration. Stable single longitudinal mode is observed, and far‐field pattern (FFP) indicates higher transverse mode operation.Keywords
This publication has 2 references indexed in Scilit:
- Surface-emitting laser diode with distributed Bragg reflector and buried heterostructureElectronics Letters, 1990
- GaAs and AlGaAs anisotropic fine pattern etching using a new reactive ion beam etching systemJournal of Vacuum Science & Technology B, 1985