Effect of Particle Size of Mica on the Properties of Poly[Ether Ether Ketone] Composites
- 30 September 2011
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 50 (14) , 1412-1420
Abstract
A study on high performance PEEK composites prepared by incorporating with three different particle sizes of mica was fabricated by compression molding. The effects of particle size of mica on the mechanical, thermal and morphological properties were studied. The incorporation of mica increased tensile modulus. The percentage crystallinity of PEEK mica composites was studied by using modulated DSC. The storage modulus changed significantly with the variation of the mica particle size and content in the PEEK matrix. Composite containing 20 wt% mica exhibited about a 79% increase in the storage modulus at 50°C and about a 68% increase at 250°C.Keywords
This publication has 21 references indexed in Scilit:
- Effect of Coupling Agent on the Mechanical, Thermal, Electrical, Rheological and Morphological Properties of Polyetheretherketone Composites Reinforced with Surface-Modified MicaPolymer-Plastics Technology and Engineering, 2010
- Mineral Fillers in Thermoplastics: Filler Manufacture and Characterisation2007
- Preparation of high performance composites based on aluminum nitride/poly(ether–ether–ketone) and their propertiesEuropean Polymer Journal, 2005
- On Modulus and Fracture Toughness of Rigid Particulate Filled High Density PolyethyleneThe Journal of Adhesion, 1997
- Mechanisms of particulate filled polypropylene finite plastic deformation and fractureJournal of Materials Science, 1997
- Interlaminar fracture toughness of a range of continuous fibre peek compositesComposites Science and Technology, 1993
- A Continuum Model for Void Nucleation by Inclusion DebondingJournal of Applied Mechanics, 1987
- Failure processes in elastomers at or near a rigid spherical inclusionJournal of Materials Science, 1984
- Detachment of an elastic matrix from a rigid spherical inclusionJournal of Materials Science, 1980
- The strength of polymeric composites containing spherical fillersJournal of Applied Polymer Science, 1974