The Effect of a Moving Floor on Wind-Tunnel Simulation of Road Vehicles
Authors:
- 1 February 1988
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The importance of using a moving floor to simulate the flow around a passenger car in a wind tunnel is considered. Measurements on a typical l/3rd scale car at normal ground clearance show that floor movement reduces drag by about 8% and reduces lift by nearly 30%. The effect on lift is more pronounced when the vehicle is yawed to the flow. Experiments on an idealised car shape show that there is a marked effect of floor movement if the underbody has rear upsweep. However in the near wake of a flat-based version of that model, with a straight underbody throughout, detailed velocity surveys show surprisingly little effect of floor movement. On the other hand, measurements of the structure of the wakes of a fixed wheel on a stationary floor and a rotating wheel on a moving floor show a large effect of floor movement.Keywords
This publication has 9 references indexed in Scilit:
- Effect of moving ground simulation on the flow past bus modelsJournal of Wind Engineering and Industrial Aerodynamics, 1986
- “Reynolds effect” and “moving ground effect” tested in a quarter scale wind tunnel over a high speed moving beltJournal of Wind Engineering and Industrial Aerodynamics, 1986
- The moving-belt of the I.A.T. long test section wind tunnelJournal of Wind Engineering and Industrial Aerodynamics, 1986
- Wind tunnel tests on road vehicle models using a moving belt simulation of ground effectJournal of Wind Engineering and Industrial Aerodynamics, 1986
- Wake Traverses Behind Production Cars and Their InterpretationSAE International Journal of Advances and Current Practices in Mobility, 1985
- Evaluation of a Complete Wake Integral for the Drag of a Car-Like ShapeSAE International Journal of Advances and Current Practices in Mobility, 1984
- Some Observations on Road Vehicle WakesSAE International Journal of Advances and Current Practices in Mobility, 1984
- The Effect of Base Slant on the Flow Pattern and Drag of Three-Dimensional Bodies with Blunt Ends1978
- A pulsed-wire technique for velocity measurements in highly turbulent flowsJournal of Fluid Mechanics, 1971