Theoretical modeling and experimental characterization of a rod-pinch diode
Authors:
- 20 September 2001
- journal article
- conference paper
- Published by AIP Publishing in Physics of Plasmas
- Vol. 8 (10) , 4618-4636
Abstract
The rod-pinch diode consists of an annular cathode and a small-diameter anode rod that extends through the hole in the cathode. With high-atomic-number material at the tip of the anode rod, the diode provides a small-area, high-yield x-ray source for pulsed radiography. The diode is operated in positive polarity at peak voltages of 1 to 2 MV with peak total electrical currents of 30–70 kA. Anode rod diameters as small as 0.5 mm are used. When electrode plasma motion is properly included, analysis shows that the diode impedance is determined by space-charge-limited current scaling at low voltage and self-magnetically limited critical current scaling at high voltage. As the current approaches the critical current, the electron beam pinches. When anode plasma forms and ions are produced, a strong pinch occurs at the tip of the rod with current densities exceeding Under these conditions, pinch propagation speeds as high as 0.8 cm/ns are observed along a rod extending well beyond the cathode. Even faster pinch propagation is observed when the rod is replaced with a hollow tube whose wall thickness is much less than an electron range, although the propagation mechanism may be different. The diode displays well-behaved electrical characteristics for aspect ratios of cathode to anode radii that are less than 16. New physics understanding and important properties of the rod-pinch diode are described, and a theoretical diode current model is developed and shown to agree with the experimental results. Results from numerical simulations are consistent with this understanding and support the important role that ions play. In particular, it is shown that, as the ratio of the cathode radius to the anode radius increases, both the Langmuir–Blodgett space-charge-limited current and the magnetically limited critical current increase above previously predicted values.
Keywords
This publication has 33 references indexed in Scilit:
- Particle-in-cell simulations of high-power cylindrical electron beam diodesPhysics of Plasmas, 2000
- New developments in paraxial radiographic diode technology for focusing intense relativistic electron beamsIEEE Transactions on Plasma Science, 2000
- Relativistic space-charge-limited bipolar flowPhysical Review E, 1998
- User-configurable MAGIC for electromagnetic PIC calculationsComputer Physics Communications, 1995
- Power flow between a plasma-opening switch and a load separated by a high-inductance magnetically insulated transmission lineJournal of Applied Physics, 1994
- Two-frame flash x-radiography device for the study of particle beam fusion target implosionsReview of Scientific Instruments, 1983
- Production of Intense Proton Beams in Pinched-Electron-Beam DiodesPhysical Review Letters, 1976
- Explosive emission of electronsSoviet Physics Uspekhi, 1975
- The Gamble I Pulsed Electron Beam GeneratorJournal of Vacuum Science and Technology, 1973
- The Interaction of Electron and Positive Ion Space Charges in Cathode SheathsPhysical Review B, 1929