NANO-FINISHING OF STAINLESS-STEEL TUBES USING ROTATIONAL MAGNETORHEOLOGICAL ABRASIVE FLOW FINISHING PROCESS
- 5 November 2010
- journal article
- research article
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 14 (3) , 365-389
Abstract
A new polishing method called Rotational (R)-Magnetorheological Abrasive Flow Finishing (MRAFF) process has been proposed by rotating a magnetic field applied to the Magnetorheological polishing (MRP) medium in addition to the reciprocating motion provided by the hydraulic unit to finish internal surface of cylindrical stainless steel (non-magnetic) workpiece. By intelligently controlling these two motions uniform smooth mirror-like finished surface in the range of nm has been achieved. For parametric analysis of the process, the experiments have been planned using design of experiments technique and response surface regression analysis is performed to analyze the effects of process parameters on finishing performance. Analysis of Variance (ANOVA) is conducted and contribution of each model term affecting percent improvement in surface finish is calculated. The experimental results are discussed and optimum finishing conditions are identified from optimization study. The present study shows that rotational speed of the magnet has most significant effect on output response (percentage improvement in surface roughness, %ΔR a ). The best surface finish obtained on stainless steel workpiece with R-MRAFF process is 16 nm.Keywords
This publication has 16 references indexed in Scilit:
- Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasivesInternational Journal of Machine Tools and Manufacture, 2009
- A study on the fabrication of curved surfaces using magnetorheological fluid finishingInternational Journal of Machine Tools and Manufacture, 2007
- Finishing effects of spiral polishing method on micro lapping surfaceInternational Journal of Machine Tools and Manufacture, 2007
- Magnetorheological Jet Finishing of Conformal, Freeform and Steep Concave OpticsCIRP Annals, 2006
- Nanofinishing of silicon nitride workpieces using magnetorheological abrasive flow finishingInternational Journal of Nanomanufacturing, 2006
- Study on the inner surface finishing of tubing by magnetic abrasive finishingInternational Journal of Machine Tools and Manufacture, 2005
- Design and development of the magnetorheological abrasive flow finishing (MRAFF) processInternational Journal of Machine Tools and Manufacture, 2004
- Modeling of material removal and surface roughness in abrasive flow machining processInternational Journal of Machine Tools and Manufacture, 1999
- Study of the surface modification resulting from an internal magnetic abrasive finishing processWear, 1999
- Study on Magnetic Abrasive FinishingCIRP Annals, 1990