Quantifying evaporation in a permeable pavement system
Authors:
- 8 September 2014
- journal article
- research article
- Published by Wiley in Hydrological Processes
- Vol. 29 (9) , 2100-2111
Abstract
Studies quantifying evaporation from permeable pavement systems are limited to a few laboratory studies and one field application. This research quantifies evaporation for a larger field application by measuring the water balance from lined permeable pavement sections. The U.S. Environmental Protection Agency constructed a 0.4 ha parking lot in Edison, NJ, that incorporated three different permeable pavement types in the parking lanes – permeable interlocking concrete pavers (PICP), pervious concrete (PC) and porous asphalt (PA). An impermeable liner installed 0.4 m below the surface in four 11.6 m by 4.74 m sections per each pavement type captures all infiltrating water and routes it to collection tanks that can contain events up to 38 mm. Each section has a design impervious area to permeable pavement area ratio of 0.66:1. Pressure transducers installed in the underdrain collection tanks measured water level for 24 months. Level was converted to volume using depth‐to‐volume ratios for individual collection tanks. Using a water balance approach, the measured infiltrate volume was compared to rainfall volume on an event basis to determine the rainfall retained in the pavement strata and underlying aggregate. Interevent evaporation created additional storage in the pavement and aggregate layers. Events were divided into three groups based on antecedent dry period (ADP) and three 4 month groups of potential evaporation based on historical monthly pan evaporation records. There was a significant difference in rainfall retained among the various combinations of ADP and potential evaporation groups. More rainfall was retained in the pavement and aggregate layers as time between events increased and during warmer months with larger potential evaporation. Average cumulative evaporation from the permeable pavement sections for 134 rainfall events in 24 months was 5.2% of the cumulative rainfall volume, and the range was 2.4–7.6%. Each PC section had more annual evaporation than any individual PICP or PA section. While measureable, evaporation is a small contribution to the total water budget on an annual basis for these systems. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
This publication has 21 references indexed in Scilit:
- Evaluation of Surface Infiltration Testing Procedures in Permeable Pavement SystemsJournal of Environmental Engineering, 2014
- Chloride Released from Three Permeable Pavement Surfaces after Winter Salt ApplicationJawra Journal of the American Water Resources Association, 2013
- Assessment of Clogging Dynamics in Permeable Pavement Systems with Time Domain ReflectometersJournal of Environmental Engineering, 2013
- Applicability of Classical Predictive Equations for the Estimation of Evapotranspiration from Urban Green Spaces: Green Roof ResultsJournal of Hydrologic Engineering, 2013
- Estimation of Evapotranspiration from Bioretention Areas Using Weighing LysimetersJournal of Hydrologic Engineering, 2010
- Hydrologic Comparison of Four Types of Permeable Pavement and Standard Asphalt in Eastern North CarolinaJournal of Hydrologic Engineering, 2008
- Evaluation of Four Permeable Pavement Sites in Eastern North Carolina for Runoff Reduction and Water Quality ImpactsJournal of Irrigation and Drainage Engineering, 2007
- A test of porous pavement effectiveness on clay soils during natural storm eventsWater Research, 2006
- Long-term stormwater quantity and quality performance of permeable pavement systemsWater Research, 2003
- The role of urban surfaces (permeable pavements) in regulating drainage and evaporation: development of a laboratory simulation experimentHydrological Processes, 1999