Analog-DFE-based 16Gb/s SerDes in 40nm CMOS that operates across 34dB loss channels at Nyquist with a baud rate CDR and 1.2Vpp voltage-mode driver
Authors:
- 1 February 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01936530,p. 350-351
Abstract
In networking systems today data rates are increasing beyond 15Gb/s and yet the installed backplanes are made of low cost materials with losses in excess of 30dB at 7.5GHz. Standards, such as IEEE802.3ap-10GBASE-KR and OIF CEI25G, are specifying SerDes requirements for channels with 25dB loss at Nyquist and this has driven the development of SerDes with 4 or 5 tap DFEs. Until now, solutions for 34dB or more channel loss have been limited to 10.3Gb/s or below, whereas this paper describes an adaptive 14-tap DFE that achieves a 1017 BER across a 34dB loss channel at 16Gb/s for a power of 235mW/lane. A baud-rate CDR technique is specifically developed that gives excellent locking characteristics and alignment for use with a speculative DFE together with an enhanced swing TX voltage mode driver.Keywords
This publication has 4 references indexed in Scilit:
- A 32mW 7.4Gb/s protocol-agile source-series-terminated transmitter in 45nm CMOS SOI2010
- A 4-channel 10.3Gb/s backplane transceiver macro with 35dB equalizer and sign-based zero-forcing adaptive control2009
- An 8Gb/s Transceiver with 3×-Oversampling 2-Threshold Eye-Tracking CDR Circuit for -36.8dB-loss BackplaneIEEE International Solid-State Circuits Conference, 2008
- A 12.5Gb/s SerDes in 65nm CMOS Using a Baud-Rate ADC with Digital Receiver Equalization and Clock Recovery2007