Al-1.5Fe-xLa Alloys for Lithium-Ion Battery Package
Open Access
Abstract
Al foil with high formability and corrosion resistance is highly desired for lithium-ion battery soft packaging. Annealing treatment has a significant impact on the performance of soft packaging Al foil. The effects of both La content and the annealing temperature on the microstructure, mechanical properties, and corrosion behavior of Al-1.5Fe-La alloy was investigated through optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), tensile testing, potentiodynamic polarization testing, and electrochemical impedance spectroscopy (EIS) testing. A higher addition of La resulted in the formation of AlFeLa particles and a refinement of the Fe-rich second phase. The Al-1.5Fe-0.25La alloy had a higher formability and corrosion resistance than the Al-1.5Fe-0.1La alloy. Microstructure analysis indicated that recovery, recrystallization, and grain growth successively occurred in the Al-Fe-La alloy with the increase of the annealing temperature from 200 °C to 250 and 380 °C. After annealing at 250 °C, the Al-Fe-La alloys had the highest corrosion resistance due to refined grain and a high fraction of small-angle grain boundaries.Keywords
Funding Information
- Shanghai Excellent Technical Leader Project (No. 15XD1524600)
This publication has 30 references indexed in Scilit:
- Thin Laminate Films for Barrier Packaging Application – Influence of Down Gauging and Substrate Surface Properties on the Permeation PropertiesPackaging Technology and Science, 2011
- Effect of Different Cooling Speed and Rare Earth La on the Microstructures and Phase Constitution of Al-Fe AlloyApplied Mechanics and Materials, 2010
- Effect of of Yb, Cr and Zr additions on recrystallization and corrosion resistance of Al–Zn–Mg–Cu alloysMaterials Science and Engineering: A, 2008
- Influence of high-temperature pre-precipitation on local corrosion behaviors of Al–Zn–Mg alloyScripta Materialia, 2007
- Electrochemical Characteristics of Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 2005
- Electrochemical behaviour of heat-treated AlZnMg alloys in chloride solutions containing sulphateElectrochimica Acta, 2002
- Influence of Fe‐Rich Intermetallic Inclusions on Pit Initiation on Aluminum Alloys in Aerated NaClJournal of the Electrochemical Society, 1999
- On the Influence of Dispersoids on the Particle Stimulated Nucleation of Recrystallization in an Al-Fe-Si Model AlloyMaterials Science Forum, 1998
- Influence of particle stimulated nucleation on the recrystallization textures in cold deformed Al-alloys Part I—Experimental observationsScripta Materialia, 1997
- Use of In Situ Atomic Force Microscopy to Image Corrosion at InclusionsJournal of the Electrochemical Society, 1994