Properties of Lightweight Controlled Low-Strength Materials Using Construction Waste and EPS for Oil and Gas Pipelines
Open Access
Abstract
Due to its particularity and importance, long-distance oil and gas pipelines need to be well protected from damage by backfill materials. In this study, construction waste and expanded polystyrene (EPS) were used to replace conventional fine aggregate, and ethylene vinyl acetate-resin (EVA) was used to modify the surface of EPS to prepare lightweight controlled low strength materials (CLSM). Lightweight CLSM was tested in mechanics and physics and its microstructure was studied using microscopic analysis methods. The results revealed that the surface modification of EPS by EVA could greatly improve the compatibility of EPS with inorganic cementitious materials and prepare CLSM with a fluidity greater than 200 mm. EPS and cement content in cementitious materials play an important role in the development of material strength. When the volume ratio of EPS to construction waste was 2, and the content of cement in the cementitious materials was 35%, CLSM’s unconfined compressive strength at 28 days was only 0.48 MPa. In order to obtain the lightweight CLSM that meets the mechanical properties, the EPS content should not be too large. It can be concluded from the microscopic analysis that the increase of EPS content will lead to poor pore uniformity of the specimen, forming a loose mesh structure of defects, which is not conducive to the development of strength. In this study, EPS and construction waste are used to provide a green idea for preparing lightweight controlled low strength materials, which provides a reference for the backfill protection of the material in oil and gas pipelines in the future.Keywords
Funding Information
- Xinjiang Uygur Autonomous Region Science and Technology Major Project (2020A03003-1)
This publication has 22 references indexed in Scilit:
- Utilization of excavated soil in coal ash-based controlled low strength material (CLSM)Construction and Building Materials, 2016
- Effect of Using Recycled Instead of Virgin EPS in Lightweight MortarsProcedia Engineering, 2016
- Strength and Stiffness Characterization of Controlled Low-Strength Material Using Native High-Plasticity ClayJournal of Materials in Civil Engineering, 2014
- Use of recycled fine aggregates for Control Low Strength Materials (CLSMs) productionConstruction and Building Materials, 2013
- A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC)Construction and Building Materials, 2013
- Construction and demolition waste indicatorsWaste Management & Research: The Journal for a Sustainable Circular Economy, 2013
- Prolonging the lives of buried crude-oil and natural-gas pipelines by cathodic protectionApplied Energy, 2007
- Mechanical behaviour of concrete made with fine recycled concrete aggregatesCement and Concrete Composites, 2007
- A review on the viable technology for construction waste recyclingResources, Conservation and Recycling, 2006
- Composition and microstructure of alkali activated fly ash binder: Effect of the activatorCement and Concrete Research, 2005