The experimental and numerical study of fracture behavior of 58s bioactive glass/polysulfone composite using the extended finite elements method
- 2 August 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 095208
Abstract
The composites derived from the bioactive glasses, such as BG/polysulfone, have better mechanical properties and their characteristics are closer to human bone. In this paper, the fracture behavior of 58s BG/PSF composite has been investigated. The extended finite elements method (XFEM) was used as an alternative numerical method to the FEM, in order to model the fracture behavior of 58s BG/PSF composite with greater accuracy. The XFEM doesn’t require remeshing at each step and achieves the precise approximation of singularities by incorporating discontinuity behavior into the elements using enrichment functions. The aim of using the XFEM was to obtain stress intensity factors, displacements, stress and strain around the crack tip, fracture toughness as well as strain energy release rate of BG/polymer composite. Moreover, the 58s BG/PSF composite with 30% volume ratio of bioactive glass particles was synthesized using solvent casting method. Meanwhile, the SEM micrographs were prepared, and the fracture mechanic tests were accomplished based on ASTM D5045 standard test method. The obtained fracture toughness was in the range of 1.4 to 1.6 MPa m , and the strain energy release rate is in the range of 1600 to 1900 J.m−2, which is comparable to the same properties of natural human bone. Also, the stress intensity factors and strain energy release rates were calculated by coding in MATLAB and modeling in ABAQUS, and the numerical results were validated with the analytical and experimental results.Keywords
This publication has 25 references indexed in Scilit:
- Fracture analysis of composites by time independent moving-crack orthotropic XFEMInternational Journal of Mechanical Sciences, 2012
- Numerical simulation of bi-material interfacial cracks using EFGM and XFEMInternational Journal of Mechanics and Materials in Design, 2011
- Synthesis, characterization and bioactivity investigation of bioglass/hydroxyapatite compositeCeramics International, 2010
- Processing, properties, and in vitro bioactivity of polysulfone‐bioactive glass compositesJournal of Biomedical Materials Research Part A, 2007
- Three‐dimensional, bioactive, biodegradable, polymer–bioactive glass composite scaffolds with improved mechanical properties support collagen synthesis and mineralization of human osteoblast‐like cells in vitroJournal of Biomedical Materials Research Part A, 2003
- Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocompositesComposites Science and Technology, 2003
- Porous polymer/bioactive glass composites for soft‐to‐hard tissue interfacesJournal of Biomedical Materials Research, 2002
- Elastic crack growth in finite elements with minimal remeshingInternational Journal for Numerical Methods in Engineering, 1999
- Hydroxyapatite-polyethylene composites for bone substitution: effects of ceramic particle size and morphologyBiomaterials, 1998
- The plane strain fracture of polysulfoneEngineering Fracture Mechanics, 1974