Interdependence of metal vapor plume and melt pool dynamics during laser beam welding under vacuum
- 10 September 2024
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (4)
Abstract
Deep penetration laser beam welding involves the emission of hot metal vapor and particles from the keyhole, which interact with the laser beam by means of scattering, absorption, and phase front deformation. The combination of scattering and absorption leads to an extinction of the laser beam, while the phase front deformation adversely affects the beam quality. The capillary formation depends on the local distribution of the absorbed irradiance of the laser beam, which in turn is related to the material process emissions. Additionally, the process atmosphere, in particular the oxygen content, and the working pressure influence the capillary fluctuations and cause variations in welding penetration. This study introduces a measurement setup using simultaneous high-speed observation of the melt pool and the keyhole while measuring the interaction mechanisms between the laser beam and the metal vapor plume during laser beam welding under vacuum of stainless steel. The obtained measurement provides a quantification of the various interaction mechanisms between the laser beam, vapor plume, keyhole, and interdepended melt pool dynamics. These quantitative high-frequency measurements at various working pressures and laser parameters provide useful insights that are crucial for understanding the formation of weld defects, resulting in process monitoring and validation of process-oriented welding simulations.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (463452146)
This publication has 17 references indexed in Scilit:
- Influence of residual oxygen during laser beam welding under vacuumMaterials Testing, 2022
- Analysis of vapor plume and keyhole dynamics in laser welding stainless steel with beam oscillationInfrared Physics & Technology, 2021
- Increasing keyhole stability of fiber laser welding under reduced ambient pressureJournal of Materials Processing Technology, 2019
- Numerical and experimental study on keyhole and melt flow dynamics during laser welding of aluminium alloys under subatmospheric pressuresInternational Journal of Heat and Mass Transfer, 2019
- Effect of subatmospheric pressure on plasma plume in fiber laser weldingJournal of Materials Processing Technology, 2015
- Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometryOptics and Lasers in Engineering, 2015
- Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration weldingOptics & Laser Technology, 2012
- Characterisation of plasma induced during high power fibre laser welding of stainless steelScience and Technology of Welding and Joining, 2008
- Experimental study of the dynamical coupling between the induced vapour plume and the melt pool for Nd–Yag CW laser weldingJournal of Physics D: Applied Physics, 2006
- Beiträge zur Optik trüber Medien, speziell kolloidaler MetallösungenAnnalen der Physik, 1908