Aerodynamic Characteristics of New Volleyball for the 2020 Tokyo Olympics
Open Access
- 7 May 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (9) , 3256
Abstract
The pattern of a modern volleyball is greatly different from that of a conventional volleyball, with several changes being made to the shape and design of the surface on the ball. Furthermore, at the 2020 Tokyo Olympics, a new volleyball (V200W; Mikasa) with 18 panels will be shown as the official ball. Therefore, this study compared the basic aerodynamic characteristics of conventional volleyballs with those of new designs in a wind tunnel. We used three full-size FIVB (Fédération Internationale de Volley-Ball) official volleyballs (V5M5000; Molten, MVA200; Mikasa and V200W; Mikasa) to determine the aerodynamic forces acting on each ball. The results indicate that the critical Reynolds number (Recr) differed depending on the ball types and their orientations. The Recr for the Molten ball (conventional) was determined to be ~3.4 × 105 (Cd = 0.17) on panel orientation A and ~2.7 × 105 (Cd = 0.14) on panel orientation B. Moreover, the Recr for the conventional Mikasa ball was determined to be ~2.6 × 105 (Cd = 0.14) on panel orientation A and ~3.0 × 105 (Cd = 0.13) on panel orientation B. On the other hand, the critical Reynolds number for the new volleyball (V200W) was ~2.9 × 105 (Cd = 0.17) in the panel orientation A and ~2.6 × 105 (Cd = 0.15) in panel orientation B. From these results, it can be hypothesized that, during a float serve, the flight trajectory will change depending on the type of volleyball and their orientation.Keywords
Funding Information
- Japan Society for the Promotion of Science (15K16442)
This publication has 14 references indexed in Scilit:
- Effect of a soccer ball’s seam geometry on its aerodynamics and trajectoryProceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2019
- Surface Patterns for Drag Modification in VolleyballsApplied Sciences, 2019
- Aerodynamic and surface comparisons between Telstar 18 and BrazucaProceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2018
- Effect of seam characteristics on critical Reynolds number in footballsMechanical Engineering Journal, 2018
- Visualization of air flow around soccer ball using a particle image velocimetryScientific Reports, 2015
- Effect of panel shape of soccer ball on its flight characteristicsScientific Reports, 2014
- A comparison of Jabulani and Brazuca non-spin aerodynamicsProceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2014
- The aerodynamic performance of a range of FIFA-approved footballsProceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2011
- Fundamental aerodynamics of a new volleyballSports Technology, 2010
- Aerodynamic characteristics and flow pattern of a golf ball with rotationProcedia Engineering, 2010