Pulsed Vacuum Surface Flashover Characteristics of $ \hbox{TiO}_{2}/\hbox{Epoxy}$ Nano–Micro Composites
Authors:
- 21 December 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 40 (1) , 68-77
Abstract
In this paper, micro (mean size is 1 μm) and nano (mean size is 10 nm) TiO2 (Titania) were loaded into epoxy resin at the same time. Eleven kinds of samples with different filler contents were prepared. Flashover characteristics of the epoxy composites were investigated under 50 ns (rise time)/1.5 μs (half-height width time) unipolar pulse and 5 × 10-3 Pa vacuum degree. It was found that the nano TiO2/epoxy composites are of higher flashover voltage than neat epoxy, and the addition of micro TiO2 in appropriate amount was able to further improve the flashover strength of the nano TiO2 /epoxy composite. In order to research the mechanism of micro and nano fillers, the permittivity and thermally stimulated depolarization current of the samples were carried out. It was clarified that, when micro filler is added into nano composite, deeplike traps can be increased remarkably, whereas shallowlike traps increase much less and even decrease in some samples. Considering the result of flashover voltage, it was confirmed that deeplike traps will increase flashover voltage.Keywords
This publication has 24 references indexed in Scilit:
- Influence of Pulse Steepness on Vacuum Flashover of Casting Epoxy ResinPlasma Science and Technology, 2009
- Flashover Characteristic of Epoxy Composites Filled With Different Micro-Inorganic Oxide Particles Under Nanosecond Pulse in VacuumIEEE Transactions on Plasma Science, 2008
- Experiments and Simulations on Influencing Factors of Pulsed Surface Flashover in Vacuum2007
- Different approach to pulsed high-voltage vacuum-insulation designPhysical Review Special Topics - Accelerators and Beams, 2007
- Proposal of a multi-core model for polymer nanocomposite dielectricsIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Influence of metal-insulator junction on surface flashover in vacuumJournal of Applied Physics, 1987
- Mechanism of fast surface flashover in vacuumApplied Physics Letters, 1974
- Pulsed Flashover of Insulators in VacuumIEEE Transactions on Electrical Insulation, 1972
- Solid insulators in vacuum: A review (Invited paper)Vacuum, 1968
- Pulsed Flashover in VacuumJournal of Applied Physics, 1967