Experimental Investigations on the Effect of Overlap Ratio and Blade Edge Conditions on the Performance of Conventional Savonius Rotor
- 1 March 2008
- journal article
- Published by SAGE Publications in Wind Engineering
- Vol. 32 (2) , 163-178
Abstract
The torque of a conventional Savonius rotor is studied experimentally for overlap ratio from 0.10 to 0.70, blade edge condition (flat and round) and the change in Reynolds number. The results indicate that the coefficient of static torque improves marginally for round edged rotors for rotor angles up to 45°. The coefficient of static torque decreases as the overlap ratio is increased to 0.70 from 0.50 and is independent of the Reynolds numbers studied in the range between 120000 to 200000. Wind tunnel blockage ratio is studied. The power coefficient increases with the increase in the Reynolds number, whereas the coefficient of static torque is independent of the Reynolds number in the range studied. The coefficient of power, torque coefficient and coefficient static torque are independent of blockage ratios at a given Reynolds number.Keywords
This publication has 7 references indexed in Scilit:
- On the performance analysis of Savonius rotor with twisted bladesRenewable Energy, 2006
- Wind Tunnel Tests on a Different Phase Three-Stage Savonius RotorJSME International Journal Series B, 2005
- On the torque mechanism of Savonius rotorsJournal of Wind Engineering and Industrial Aerodynamics, 1992
- Pressure measurements and flow visualization study of a Savonius rotorJournal of Wind Engineering and Industrial Aerodynamics, 1992
- On the Performance of the Savonius Wind TurbineJournal of Solar Energy Engineering, 1989
- Wind tunnel performance data for two- and three-bucket Savonius rotorsJournal of Energy, 1978
- Wind tunnel tests on a savonius rotorJournal of Wind Engineering and Industrial Aerodynamics, 1978