Load power and state-of-charge management strategy with MPPT of wind-driven isolated PMSG
- 3 November 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1098-1104
Abstract
This paper presents a control strategy for power management with maximum power extraction of a stand-alone wind-driven Permanent Magnet Synchronous Generator (PMSG). The main objective of the presented control strategy is to manage the generated wind-power between the load and the employed battery-bank in addition to extract the maximum wind-power and supply the load with a constant voltage and frequency. The wind generating-system under study consists of a wind turbine, PMSG, switch-mode rectifier (three-phase uncontrolled rectifier followed by DC-DC boost converter), bidirectional DC-DC converter, battery bank, three-phase SPWM inverter, LC filter, three-phase isolating transformer, main load and two auxiliary-loads. The proposed powermanagement strategy depends upon the level of the generated wind-power compared to the load power and the state of charge (SOC) level of the battery bank. The duty cycle of the DC-DC boost converter, included in the switch mode rectifier, is controlled in order to extract maximum wind-power under different operating conditions. Hence, the operating mode (charging or discharging of the battery bank) of the bidirectional DC-DC converter is controlled in order to attain an appropriate constant dc-voltage under different loading conditions. Finally, a sinusoidal pulse width modulated (SPWM) inverter is used to regulate the magnitude and frequency of the load voltage via controlling the modulation index. In order to check the validity and capability of the presented control strategy, a sample of simulation results is obtained and analyzed for the employed wind generating-system under different operating modes. The presented simulation results confirm the effectiveness of the presented control strategy to extract the maximum power from the wind and manage the active-power between the loads at a constant level of voltage and frequency.Keywords
This publication has 8 references indexed in Scilit:
- Power control of a small-scale standalone wind turbine for rural and remote areas electrification2014
- Load power management control for a stand alone wind energy system based on the state of charge of the battery2012
- A control method for maximum power point tracking of a PMSG-based WECS using online parameter identification of wind turbine2011
- Permanent Magnet Synchronous Generator-Based Standalone Wind Energy Supply SystemIEEE Transactions on Sustainable Energy, 2011
- Sensorless Power Maximization of PMSG Based Isolated Wind-Battery Hybrid System Using Adaptive Neuro-Fuzzy Controller2010
- Control of PMSG based variable speed wind-battery hybrid system in an isolated network2009
- Control of a stand alone variable speed wind turbine with a permanent magnet synchronous generator2008
- Doubly fed induction generator usingback-to-back PWM convertersand its application to variable-speed wind-energy generationIEE Proceedings - Electric Power Applications, 1996