Ultrasonic guided wave monitoring of an operational rail track
Open Access
- 25 December 2019
- journal article
- research article
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 19 (6) , 1666-1684
Abstract
An experimental monitoring system was installed on an operational heavy haul rail track. The system used two piezoelectric transducers mounted under the head of the rail to transmit and receive ultrasonic guided waves in pulse-echo mode and data were captured over a 2-week period. An artificial defect was introduced by glueing a small mass under the head of the rail at a distance of 370 m from the transducers. The size of the signal reflected by the mass varied as the glue joint deteriorated. The measurements were reordered to simulate a monotonically growing defect. The pre-processing of the captured time signals included averaging, filtering, phased array processing, dispersion compensation, signal stretching and amplitude scaling. Singular value decomposition and independent component analysis of the data were performed. Independent component analysis, with dimension reduction achieved by retaining only the larger principal components, produced the best defect detection. The defect signature was separated as an independent component, and the weight of this component increased monotonically. The results indicate that a transverse defect in the rail head could be detected and located at long range by a system comprising only two transducers. The variation of the signals due to changing environmental and operational conditions limits the size of defect that can be detected, but it is expected that even a relatively small defect, which is significantly smaller than the critical size, would be detected.Keywords
Funding Information
- Council for Scientific and Industrial Research, South Africa
This publication has 25 references indexed in Scilit:
- Robust ultrasonic damage detection under complex environmental conditions using singular value decompositionUltrasonics, 2015
- An Intelligent Methodology for Railways Monitoring Using Ultrasonic Guided WavesJournal of Nondestructive Evaluation, 2014
- Scale transform signal processing for optimal ultrasonic temperature compensationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2012
- Guided Wave Inspection and Monitoring of Railway TrackJournal of Nondestructive Evaluation, 2012
- Numerical modeling of guided wave interaction with non-axisymmetric cracks in elastic cylindersInternational Journal of Solids and Structures, 2011
- A review on non-destructive evaluation of rails: State-of-the-art and future developmentProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- Guided‐Wave Array Methods2008
- Strategies for guided-wave structural health monitoringProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007
- Post-processing of the full matrix of ultrasonic transmit–receive array data for non-destructive evaluationNDT & E International, 2005
- Rail defects: an overviewFatigue & Fracture of Engineering Materials & Structures, 2003