Improvement of Electromagnetic Field Distributions Using High Dielectric Constant (HDC) Materials for CTL-Spine MRI: Numerical Simulations and Experiments
Open Access
- 29 March 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (5) , 1382-1389
Abstract
This study investigates the use of pads with high dielectric constant (HDC) materials to alter electromagnetic field distributions in patients during magnetic resonance imaging (MRI). The study was performed with numerical simulations and phantom measurements. An initial proof-of-concept and validation was performed using a phantom at 64 MHz, showing increases of up to 10% in electromagnetic field when using distilled water as the high dielectric material. Additionally, numerical simulations with computational models of human anatomy were performed at 128 MHz. Results of these simulations using barium titanate (BaTiO3) beads showed a 61% increase of |B+1 | with a quadrature driven RF coil and a 64% increase with a dual-transmit array. The presence of the HDC material also allowed for a decrease of SAR up to twofold (e.g., peak 10 g-averaged SAR from 54 to 22 W/kg with a quadrature driven RF coil and from 27 to 22 W/kg with a dual-transmit array using CaTiO3 powder at 128 MHz). The results of this study show that the use of HDC pads at 128 MHz for MRI spine applications could result in improved magnetic fields within the region of interest, while decreasing SAR outside the region.Keywords
Funding Information
- FDA Critical Path Initiation
- Research Participation Program at the Center for Devices and Radiological Health administered
- Oak Ridge Institute for Science and Education
- U.S. Department of Energy
- U.S. Food and Drug Administration
This publication has 24 references indexed in Scilit:
- Assessing the Electromagnetic Fields Generated By a Radiofrequency MRI Body Coil at 64 MHz: Defeaturing Versus AccuracyIEEE Transactions on Biomedical Engineering, 2015
- The effect of high-permittivity pads on specific absorption rate in radiofrequency-shimmed dual-transmit cardiovascular magnetic resonance at 3TJournal of Cardiovascular Magnetic Resonance, 2015
- A New Method to Concentrate Electromagnetic Field Within ROI Using a High Dielectric Material in 3T Body MRI2013
- High permittivity pads reduce specific absorption rate, improve B1 homogeneity, and increase contrast‐to‐noise ratio for functional cardiac MRI at 3 TMagnetic Resonance in Medicine, 2013
- Permittivity and performance of dielectric pads with sintered ceramic beads in MRI: early experiments and simulations at 3 TMagnetic Resonance in Medicine, 2012
- Increasing signal homogeneity and image quality in abdominal imaging at 3 T with very high permittivity materialsMagnetic Resonance in Medicine, 2012
- Quantitative assessment of the effects of high‐permittivity pads in 7 Tesla MRI of the brainMagnetic Resonance in Medicine, 2011
- New high dielectric constant materials for tailoring thedistribution at high magnetic fieldsJournal of Magnetic Resonance, 2010
- The dielectric properties of biological tissues: II. Measurements in the frequency range 10 Hz to 20 GHzPhysics in Medicine & Biology, 1996
- Compilation of the Dielectric Properties of Body Tissues at RF and Microwave Frequencies.1996