Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines With Different PM Arrangements and Consequent-Pole Topologies
- 27 August 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (2) , 1-6
Abstract
In this paper, two doubly-fed (DF) flux reversal permanent magnet (FRPM) machines with different PM arrangements are proposed, both of which have an additional set of armature winding in their rotor slots to further enhance the torque performance. Together with their one set armature winding counterparts, comprehensive analyses and comparison among these four machines are conducted. The operation principles and winding configurations of these four machines are firstly introduced. Then, based on finite element (FE) method, the electromagnetic performances of four machines after optimization with the purpose of maximum torque are compared in terms of no-load, on-load and over-load capabilities. The results show that the DF-FRPM machine with consequent pole structure offers highest average torque and lowest torque ripple, which makes it a promising candidate for low speed and high torque applications. A prototype machine has been manufactured and the FE results have been verified.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFB1503700)
- National Natural Science Foundation of China (51977191, 51677169, 51637009)
This publication has 11 references indexed in Scilit:
- Novel Fault-Tolerant Doubly Fed Flux Reversal Machine With Armature Windings Wound on Both Stator and Rotor TeethIEEE Transactions on Industrial Electronics, 2020
- Analysis of Spoke Array Permanent Magnet Flux Reversal MachinesIEEE Transactions on Energy Conversion, 2020
- A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine With Armature Windings Wound on Both Stator Poles and Rotor TeethIEEE Transactions on Industrial Electronics, 2019
- Influence of Adjacent Teeth Magnet Polarities on the Performance of Flux Reversal Permanent Magnet MachineIEEE Transactions on Industry Applications, 2018
- Design and Analysis of a Flux Reversal Machine With Evenly Distributed Permanent MagnetsIEEE Transactions on Industry Applications, 2017
- Consequent-Pole Flux-Reversal Permanent-Magnet Machine for Electric Vehicle PropulsionIEEE Transactions on Applied Superconductivity, 2016
- Overview of Stator-Permanent Magnet Brushless MachinesIEEE Transactions on Industrial Electronics, 2011
- Power density improvement of three phase flux reversal machine with distributed windingIET Electric Power Applications, 2010
- Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell VehiclesProceedings of the IEEE, 2007
- Theoretical characterization of flux reversal machine in low-speed servo drives-the pole-PM configurationIEEE Transactions on Industry Applications, 2002