Crack Width Recognition of Tunnel Tube Sheet Based on YOLOv8 Algorithm and 3D Imaging
Open Access
Abstract
Based on the tunnel crack width identification, there are operating time constraints, limited operating space, high equipment testing costs, and other issues. In this paper, a large subway tunnel is a research object, and the tunnel rail inspection car is an operating platform equipped with industrial cameras in order to meet the requirements of the tunnel tube sheet crack width recognition of more than 0.2 mm, with the measuring instrument to verify that the tunnel rail inspection car in the state of uniform motion camera imaging quality has the reliability through the addition of laser rangefinders, the accurate measurement of the object distance and the calculation of the imaging plane and the angle of the plane to be measured, to amend the three-dimensional cracks. The pixel resolution of the image is corrected, the images imaged by the industrial camera are preprocessed, the YOLOv8 algorithm is used for the intelligent extraction of crack morphology, and finally, the actual width is calculated from the spacing between two points of the crack. The crack detection width obtained by image processing using the YOLOv8 algorithm is basically the same as the value of crack width obtained by manual detection, and the error rate of crack width detection ranges from 0% to 11%, with the average error rate remaining below 4%. Compared with the crack detection error rate of the Support Vector Machine (SVM), the crack extraction model is reduced by 1%, so using the tunnel inspection vehicle as a platform equipped with an industrial camera, YOLOv8 is used to realize the recognition of the shape and width of the cracks on the surface of the tunnel tube sheet to meet the requirements of a higher degree of accuracy. The number of pixels and the detection error rate are inversely proportional to each other. The angle between the imaging plane and the plane under test is directly proportional to the detection error rate. The angle between the vertical axis where the lens midpoint is located and the line connecting the shooting target and the lens center point is and the angle between the measured plane and the imaging plane is reciprocal, i.e., + = 90°. Therefore, using the inspection vehicle as a mobile platform equipped with an industrial camera and based on the YOLOv8 algorithm, the crack recognition of the tunnel tube sheet has the feasibility and the prospect of wide application, which provides a reference method for the detection of cracks in the tunnel tube sheet.
Keywords
Funding Information
- National Natural Science Foundation of China (2016YFB0303100, MS23020026, MS2023074)
- Natural Science Foundation of Nantong (2016YFB0303100, MS23020026, MS2023074)
- Intelligent Just Supporting Technology for Safety Risk Management of Sinking Flood Disasters in Urban Metro Systems (2016YFB0303100, MS23020026, MS2023074)
This publication has 21 references indexed in Scilit:
- Intelligent detection of fine cracks on sleepers based on improved YOLOv5 model of cascade fusionProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2023
- Automatic Detection of Bridge Surface Crack Using Improved YOLOv5sInternational Journal of Pattern Recognition and Artificial Intelligence, 2022
- Deep CNN-based concrete cracks identification and quantification using image processing techniquesAsian Journal of Civil Engineering, 2022
- Automatic defect detection of metro tunnel surfaces using a vision-based inspection systemAdvanced Engineering Informatics, 2021
- Crack identification method for concrete structures considering angle of view using RGB-D camera-based sensor fusionStructural Health Monitoring, 2020
- PD+SMC Quadrotor Control for Altitude and Crack Recognition Using Deep LearningInternational Journal of Control, Automation, and Systems, 2019
- Image‐based concrete crack assessment using mask and region‐based convolutional neural networkStructural Control and Health Monitoring, 2019
- Automatic recognition of asphalt pavement cracks using metaheuristic optimized edge detection algorithms and convolution neural networkAutomation in Construction, 2018
- Autonomous Structural Visual Inspection Using Region‐Based Deep Learning for Detecting Multiple Damage TypesComputer-Aided Civil and Infrastructure Engineering, 2017
- Inspection equipment study for subway tunnel defects by grey-scale image processingAdvanced Engineering Informatics, 2017