MgO-MgAl 2 O 4 -Supported Flat-Tubular Segmented-In-Series SOFCs Featuring Ultra-High Conductivity Interlayer for Enhanced Performance
- 31 January 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8015-8025
Abstract
Development of a highly conductive interlayer with good multilayer interfacial compatibility is critical for achieving high-performance inert ceramic-supported flat-tubular segmented-in-series solid oxide fuel cells (FT-SIS-SOFCs). In this study, a high-performance MgO-MgAl2O4 (MMA)-supported solid oxide fuel cell is prepared by developing an innovative 70 vol % NiO-30 vol % MgAl2O4 interlayer via a cosintering process. The NiO-MgAl2O4 interlayer effectively suppresses MgO diffusion from the MMA substrate, limiting the diffusion distance to 25 μm. Additionally, the conductivity of the fabricated interlayer exceeds 3400 S cm-1 at the operational temperature. It exhibits excellent cosintering compatibility with the other functional layers. When the thickness of the NiO-MgAl2O4 interlayer is approximately 40 μm, the MMA-supported SOFC single cell shows an open circuit voltage (OCV) of about 1.07 V and a power density of 760 mW cm-2 at 850 °C, as well as excellent long-term stability. Moreover, the 16-cell FT-SIS-SOFCs show an OCV and maximum output power at 850 °C of 17 V and 15 W, respectively.Keywords
Funding Information
- National Basic Research Program of China (973 Program) (2021YFB4001400)
- Shandong Moon Hydrogen Technology Research Institute Co., Ltd
This publication has 35 references indexed in Scilit:
- High-precision identification of polarization processes of proton exchange membrane fuel cells through relaxation time analysis: Targeted experimental design and verificationApplied Energy, 2024
- Power evolution of fuel cell stack driven by anode gas diffusion layer degradationApplied Energy, 2022
- Low-cost preparation and characterization of MgAl2O4 ceramicsCeramics International, 2022
- Nickel Depletion and Agglomeration in SOFC Anodes During Long‐Term OperationFuel Cells, 2017
- La0.4Bi0.4Sr0.2FeO3-δ as Cobalt-free Cathode for Intermediate-Temperature Solid Oxide Fuel CellElectrochimica Acta, 2016
- Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundleEnergy, 2014
- Effect of Thermal Cycling on Residual Stress and Curvature of Anode‐Supported SOFCsFuel Cells, 2009
- Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particlesComposites Part A: Applied Science and Manufacturing, 2008
- Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC)Chemical Engineering Journal, 2004
- Surface Ni2+ diffusion in sol—gel-derived tetragonal and monoclinic ZrO2 matricesJournal of Non-Crystalline Solids, 1995