Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers
- 5 August 2010
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 18 (8) , 840-851
Abstract
The increased size and flexibility of modern multi‐Megawatt wind turbines has resulted in the dynamic behaviour of these structures becoming an important design consideration. The aim of this paper is to study the variation in natural frequency of wind turbine blades due to centrifugal stiffening and the potential use of semi‐active tuned mass dampers (STMDs) in reducing vibrations in the flapwise direction with changing parameters in the turbine. The parameters considered were the rotational speed of the blades and the stiffness of the blades and nacelle. Two techniques have been employed to determine the natural frequency of a rotating blade. The first employs the Frobenius method to a rotating Bernoulli‐Euler beam. These results are compared with the natural frequencies determined from an eigenvalue analysis of the dynamic model of the turbine including nacelle motion, which is developed in this paper. The model derived considers the structural dynamics of the turbine and includes the dynamic coupling between the blades and tower. The semi‐active control system developed employs a frequency‐tracking algorithm based on the short‐time Fourier transform technique. This is used to continually tune the dampers to the dominant frequencies of the system. Numerical simulations have been carried out to study the effectiveness of the STMDs in reducing flapwise vibrations in the system when variations occur in certain parameters of the turbine. Steady and turbulent wind loading has been considered. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 23 references indexed in Scilit:
- Structural testing and numerical simulation of a 34m composite wind turbine bladeComposite Structures, 2006
- Reliability analysis for wind turbinesWind Energy, 2006
- Enhancing the damping of wind turbine rotor blades, the DAMPBLADE projectWind Energy, 2005
- Influence of wind turbine flexibility on loads and power productionWind Energy, 2005
- Structural investigation of composite wind turbine blade considering various load cases and fatigue lifeEnergy, 2005
- Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loadingEngineering Structures, 2005
- A phenomenological model for the dynamic response of wind turbines to turbulent windJournal of Wind Engineering and Industrial Aerodynamics, 2003
- Reliability-based design of wind-turbine rotor blades against failure in ultimate loadingEngineering Structures, 2000
- A summary of the fatigue properties of wind turbine materialsWind Energy, 2000
- Structural design of a composite wind turbine blade using finite element analysisComputers & Structures, 1997