Creep Behavior of Resin Matrix and Basalt Fiber Reinforced Polymer (BFRP) Plate at Elevated Temperatures
Open Access
- 24 May 2017
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 1 (1) , 3
Abstract
Pre-stressed fiber reinforced polymer (FRP) has great application potential in structural strengthening. However, the elevated temperature resistance of FRPs is always a key concern due to the poor thermal stability of its resin matrix. In this study, the effects of temperature on the creep behavior of the resin matrix and basalt fiber reinforced polymer (BFRP) was experimentally investigated. The tensile stresses were set at 2.6 MPa for the resin matrix and 522 MPa (35% of its ultimate tensile strength (fu)) for BFRP, and the exposure temperatures were 25 °C, 80 °C, 120 °C, and 160 °C. The short-term strain of the resin matrix and BFRP exposed to different exposure temperatures was measured. The variation of the thermal property and interlaminar shear strength (ILSS) of the BFRP were studied. The results indicated that molecular chain disruption and post-cure coexisted. The resin matrix is sensitive to the exposure temperatures, and a remarkable increase of the strain was observed when the exposure temperature exceeded its glass transition temperature (107.5 °C). The resin matrix fractured within 50 seconds when it was exposed to 160 °C. BFRP showed excellent temperature resistance even though the exposure temperature exceeded its glass transition temperature (123.7 °C). Sustained loading led to stress transferring to the basalt fiber in BFRP specimens, especially at elevated temperatures. Stress redistribution caused interfacial damage, and ILSS decreased by 0.5%, 13.6%, and 14.6% for 80 °C, 120 °C, and 160 °C exposure from its original value of 73.5 MPa. Dynamic mechanical thermal analysis (DMTA) was used to explain the post-curing and interface damage of BFRP.Keywords
This publication has 36 references indexed in Scilit:
- Effects of elevated temperature on near surface mounted and externally bonded FRP strengthening systems for concreteCement and Concrete Composites, 2013
- Creep and recovery of polypropylene/carbon nanotube compositesInternational Journal of Plasticity, 2011
- RETRACTED: Environmental resistance and mechanical performance of basalt and glass fibersMaterials Science and Engineering: A, 2010
- Creep and impact properties of wood fibre–polypropylene composites: influence of temperature and moisture contentComposites Science and Technology, 2004
- Dynamic mechanical analysis of particulate‐filled epoxy resinJournal of Applied Polymer Science, 2003
- Matrix crack propagation criteria for model short-carbon fibre/epoxy compositesComposites Science and Technology, 2000
- Creep rupture of a GFRP composite at elevated temperaturesComputers & Structures, 2000
- Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materialsPolymer Composites, 1993
- Effect of cross-link density on modification of epoxy resins with reactive acrylic elastomersEuropean Polymer Journal, 1992
- The mechanisms of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposures to high humidity environmentsPolymer Engineering & Science, 1978