Development of novel proton exchange membranes based on cross-linked polyvinyl alcohol (PVA)/5-sulfosalicylic acid (SSCA) for fuel cell applications
Open Access
- 23 June 2024
- journal article
- research article
- Published by Springer Nature in Discover Applied Sciences
- Vol. 6 (7) , 1-25
Abstract
The proton-conducting and methanol permeation behaviors of polymeric electrolyte membranes (PEMs), as well as the expensive nature of direct methanol fuel cell (DMFC) components, pose major concerns in DMFC performance and commercialization. As a result, this research aimed to develop low-cost polyelectrolyte membranes based on cross-linked poly(vinyl alcohol)/5-sulfosalicylic acid dehydrate (PVA/SSCA) composite. Chemical cross-linkers and modifiers offer the essential chemical and mechanical stability of the developed membranes for usage as polyelectrolyte membranes (PEMs). The manufactured composite proton exchange membranes provide several benefits, including significant thermal, chemical, and mechanical stability. The results revealed that extending the SSCA molar concentration increased IEC outcomes of the synthesized membranes, reaching an elevated level of (3.31 meq g−1) compared to (0.91 meq g−1) for the Nafion 117 membrane. The proton conductivity of a composite membrane (102 μm thick) measured by impedance spectroscopy was relatively (0.078 S cm−1) and found comparable to other PVA-based composite membranes reported in the literature. Other key parameters, such as methanol permeability, were measured for constructed composite proton exchange membranes (2.52 × 10–7 cm2 s−1), which were much lower than Nafion 117 (3.39 × 10–6 cm2 s−1). The Fourier transform infrared (FT-IR), Raman scattering spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, elemental analysis, and thermal gravimetric analysis (TGA) were among the techniques used to characterize the synthesized membranes. These characterizations confirm the structural interaction between the membrane components’ crystalline nature, and no signs of phase separation or cracks were found; surface morphology and good membrane homogeneity, elemental analysis, and the membranes’ thermal stability (up to 290 °C). The membranes were also mechanically characterized using a universal testing machine (UTM), which revealed good mechanical stability. The findings demonstrate that a low-cost proton exchange membrane could potentially be synthesized for DMFC applications.Keywords
Funding Information
- Science and Technology Development Fund (46947)
This publication has 80 references indexed in Scilit:
- Non‐fluorinated PVA/SSA proton exchange membrane studied by positron annihilation technique for fuel cell applicationPolymers for Advanced Technologies, 2021
- A review of quaternized polyvinyl alcohol as an alternative polymeric membrane in DMFCs and DEFCsInternational Journal of Energy Research, 2020
- Formulation and characterization of crosslinked polyvinyl alcohol (PVA) membranes: effects of the crosslinking agentsPolymer Bulletin, 2020
- Effect of crosslinking on the properties of partially fluorinated anion exchange membranesJournal of Polymer Science Part A: Polymer Chemistry, 2019
- Investigation the Effect of TiO2 Nanoparticles on Proton Exchange Membrane of sPEEK Used as a Fuel Cell Electrolyte Based on Phase DiagramJournal of Inorganic and Organometallic Polymers and Materials, 2017
- Macroporous chitosan/polyvinyl alcohol composite adsorbents based on activated carbon substrateJournal of Porous Materials, 2017
- Click Grafting of Chitosan onto PVC Surfaces for Biomedical ApplicationsAdvances in Polymer Technology, 2015
- Effect of degree of cross-linking on swelling and on drug release of low viscous chitosan/poly(vinyl alcohol) hydrogelsPolymer Bulletin, 2014
- Novel grafted nafion membranes for proton‐exchange membrane fuel cell applicationsJournal of Applied Polymer Science, 2010
- Effects of Crosslinking Methods on Structure and Properties of Cellulose/PVA HydrogelsMacromolecular Chemistry and Physics, 2008