Enhancing Misalignment Tolerance Using Naturally Decoupled Identical Dual-Transmitter–Dual-Receiver Coils for Wireless EV Charging System
- 21 August 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (5) , 5337-5351
Abstract
The rapid reduction of power transfer efficiency with misalignment is a matter of grave concern for compact high power WPT systems. The misalignment tolerance can be increased by using complex control techniques but the efficient misalignment operation range is still narrow and efficiency drops significantly beyond that range. This paper proposes a novel natural decoupling method to enhance the efficient misalignment operation range for identical symmetrical quadruple-D coils arranged in a dual-transmitter-dual-receiver configuration without requiring any control. Decoupling of multiple transmitters and receivers is essential for efficient zero phase angle (ZPA) operation. At fully aligned condition the experimental prototype of this design exhibits a peak efficiency of 96% at 2.25 kW output power for a vertical distance of 150 mm. The misalignment operation range extends from +300 mm to -100 mm for a 400 mm x 400 mm coil size with almost constant efficiency (94.78% - 96.19%). The rated power operation points occur at 0 mm (fully aligned) and also at +200 mm (50% misaligned position) thus making it possible to obtain full rated power without fully aligning the EV.Keywords
Funding Information
- Universiti Malaya Matching (MG033-2022)
This publication has 36 references indexed in Scilit:
- A metal object detection system for electric vehicle wireless charging with quadrupole detection coilsEnergy Reports, 2023
- A multi-channel wireless charging system with constant-voltage outputs based on LCC-S topology and integrated magnetic designEnergy Reports, 2023
- Research on Quadruple D coil with High Misalignment Tolerance for Wireless Power Transfer2021
- Optimisation of planar rectangular coil achieving uniform magnetic field distribution for EV wireless charging based on genetic algorithmIET Power Electronics, 2019
- Design and Implementation of an Optimized 100 kW Stationary Wireless Charging System for EV Battery Recharging2018
- A multi-level converter for high power-high frequency IPT systems2014
- MOSFET based Multilevel converter for IPT systems2014
- Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer SystemsIEEE Transactions on Industrial Electronics, 2009
- Design Considerations for a Contactless Electric Vehicle Battery ChargerIEEE Transactions on Industrial Electronics, 2005
- Comparison of Ampere's circuital law (ACL) and the law of Biot-Savart (LBS)IEEE Transactions on Education, 1988