Design, fabrication, and characterization of polymer-based cantilever probes for atomic force microscopes
Open Access
- 11 August 2016
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 34 (6) , 06KI01
Abstract
Micromachined polymer-based cantilever probes have been proposed for atomic force microscopes (AFMs) in order to enable noninvasive, rapid high-resolution topography imaging and mechanical measurements of live biological samples. Polymer-based probes developed to date still consist of a rather stiff cantilever with a relatively high spring constant prone to causing deformation and/or distortion of biological sample surfaces during scanning and a rather blunt tip that limits high-resolution topography imaging. This paper reports the design, fabrication, and characterization of soft polymer-based AFM probes. The proposed probe design and fabrication process utilize an acrylic polymer as the structural material, sequential depositions of low and high viscosity acrylic polymers, and a properly patterned optical reflection coating in order to achieve low effective spring constants (less than 0.01 N/m), relatively small tip radii (as small as 40 nm), and relatively low strain gradient (around 10−4/μm). The fabricated polymer AFM probes are calibrated and characterized through experiments and used to obtain AFM height and deflection images of a live mammalian cell in liquid. Experimental results show that the above design specifications have been successfully achieved.Keywords
Funding Information
- National Science Foundation (DBI-1353890)
This publication has 51 references indexed in Scilit:
- Effects of antibacterial agents and drugs monitored by atomic force microscopyWIREs Nanomedicine and Nanobiotechnology, 2014
- Mechanical properties of biological specimens explored by atomic force microscopyJournal of Physics D: Applied Physics, 2013
- Mapping nanomechanical properties of live cells using multi-harmonic atomic force microscopyNature Nanotechnology, 2011
- Atomic force microscopy: a nanoscopic window on the cell surfaceTrends in Cell Biology, 2011
- AFM indentation study of breast cancer cellsBiochemical and Biophysical Research Communications, 2008
- Atomic force microscopy as a multifunctional molecular toolbox in nanobiotechnologyNature Nanotechnology, 2008
- Atomic force microscopy probing of cell elasticityMicron, 2007
- Force measurements with the atomic force microscope: Technique, interpretation and applicationsSurface Science Reports, 2005
- Scanning Probe Evolution in BiologyScience, 2003
- Quantitative imaging of nanoscale mechanical properties using hybrid nanoindentation and force modulationJournal of Applied Physics, 2001