Assessment of the Shear Strength of Pile-to-Soil Interfaces Based on Pile Surface Topography Using Laser Scanning
Open Access
Abstract
This article presents in situ research on the side surface of continuous flight auger (CFA) foundation piles using a three-dimensional (3D) laser scanner (Leica ScanStation C10) in order to evaluate the morphology assessment of pile concrete surfaces in various geotechnical layers. Terrestrial laser scanning describes the 3D geometry of the construction with high spatial resolution and accuracy. A total of six areas were selected from the acquired point cloud for which a two-step approach for removing the form was applied. In the first step, the reference surface was fitted using the least squares method, and then, cylindrical projection of the surface was performed. In the second step, an operator of removal of the multi-plane form was applied. For each sample, height parameters (Sq, Ssk, Sku, Sp, Sv, Sz, Sa) and functional volume parameters (Vmp, Vmc, Vvc, Vvv) according to the standard ISO 25178-2:2012 were determined. Significant differences in the values of surface height and functional volume parameters were observed for each geotechnical layer where piles were formed. Because the piles remain embedded in the ground, in situ tests of the side surface of piles are rarely performed and taken into account in the assessment of pile bearing capacity. The study of surface topography is a crucial stage in the assessment of the shear strength at the interface between a concrete pile and the soil layer. The obtained concrete morphology assessments are applicable during the determination of the skin friction factor in the analytical or numerical estimation of pile shaft resistance. The proposed procedure of morphology evaluation may improve the fidelity of the assumed friction factor between the concrete and soil and increase the reliability of direct shear experiments.Keywords
This publication has 28 references indexed in Scilit:
- Determining the inclination of tall chimneys using the TPS and TLS approachMeasurement, 2015
- Error in target-based georeferencing and registration in terrestrial laser scanningComputers & Geosciences, 2015
- Methods of laser scanning point clouds integration in precise 3D building modellingMeasurement, 2015
- Effect of the machine parts surface topography features on the machine serviceMechanik, 2015
- Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layersConstruction and Building Materials, 2015
- NEW NONDESTRUCTIVE WAY OF IDENTIFYING THE VALUES OF PULL-OFF ADHESION BETWEEN CONCRETE LAYERS IN FLOORSJOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2014
- How to select the most relevant 3D roughness parameters of a surfaceScanning, 2013
- A state-of-the-art review on roughness quantification methods for concrete surfacesConstruction and Building Materials, 2013
- Method for determining the parameters of surface roughness by usage of a 3D scannerArchives of Civil and Mechanical Engineering, 2012
- Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfacesTribology International, 2004