Synthesis and Characterization of Limonene-Based Sulfur Polymer
Authors:
- Ramazan OrhanRORamazan Orhan
- Ercan AydoğmuşEAErcan Aydoğmuş
Open Access
- 18 November 2021
- journal article
- research article
- Published by ASOS Yayinevi in European Journal of Science and Technology
- No. 28,p. 1517-1520
Abstract
Bu araştırmada, portakal kabuklarından ekstrakte edilen limonen ile kükürt bazlı bir polimer sentezlenmiştir. Sentez işlemi, erimiş kükürt içerisine kütlece % 0, % 0.5, % 1, % 2 ve % 4 oranında limonen damlatılarak gerçekleştirilmiştir. Sentezlenen kükürt bazlı polimerin kimyasal bağ yapısındaki değişiklik Fourier Dönüşümü Kızılötesi Spektrofotometresi (FTIR) ile belirlenmiştir. Ayrıca, kükürt bazlı polimerin yoğunluğu, Shore D sertliği ve termal iletkenlik katsayısı da karakterize edilmiştir. Yapılan değerlendirmelere göre en iyi sonuçlar ağırlıkça % 1 portakal kabuğundan ekstrakte edilen limonen ile elde edilmiştir. Kütlece % 1'in altında limonen kullanıldığında polimerizasyon veriminin düşük olduğu gözlemlenmiştir. Daha yüksek oranlarda limonene kullanımı kükürt bazlı polimerin Shore D sertliği azaltmış ve böylece daha yumuşak bir polimer sentezlenmiştir. Ayrıca, kükürt bazlı polimerin ortalama yoğunluğu yaklaşık 2067 kg/m3 ve ısıl iletkenlik katsayısı da 0.25 W/m·K olarak ölçülmüştür. Polimer karışımındaki limonen içeriği arttıkça ısıl iletkenlik katsayısı düşmüş ve daha gözenekli bir yapı oluşmuştur. In this research, a sulfur-based polymer has been synthesized with limonene extracted from orange peels. The synthesis process has been carried out by dropping limonene at 0 wt.%, 0.5 wt.%, 1 wt.%, 2 wt.%, and 4 wt.% ratios into the molten sulfur. The change in the chemical bond structure of the synthesized sulfur-based polymer is determined by Fourier Transform Infrared Spectrophotometer (FTIR). Moreover, the density, Shore D hardness, and thermal conductivity coefficient of the sulfur-based polymer are also characterized. According to the evaluations, it has been seen that limonene extracted from 1% orange peel gave the best results. It has been observed that the polymerization efficiency is low when used below 1 wt.% by mass. At higher rates, Shore D hardness of the sulfur-based polymer decreases, thus a softer polymer is obtained. Besides, the density of the sulfur-based polymer is approximately 2067 kg/m3, and the thermal conductivity coefficient is measured at an average of 0.25 W/m·K. As the content of limonene in the polymer mixture raises, the thermal conductivity coefficient decreases and a more porous structure is formed.Keywords
This publication has 15 references indexed in Scilit:
- Optical Properties of a Sulfur-Rich Organically Modified Chalcogenide Polymer Synthesized via Inverse Vulcanization and Containing an Organometallic ComonomerACS Macro Letters, 2019
- Low cost and renewable sulfur-polymers by inverse vulcanisation, and their potential for mercury captureJournal of Materials Chemistry A, 2016
- Sulfur‐Based Polymer Composites from Vegetable Oils and Elemental Sulfur: A Sustainable Active Material for Li–S BatteriesMacromolecular Chemistry and Physics, 2016
- Inverse vulcanization of bismaleimide and divinylbenzene by elemental sulfur for lithium sulfur batteriesEuropean Polymer Journal, 2016
- Sulfur‐Limonene Polysulfide: A Material Synthesized Entirely from Industrial By‐Products and Its Use in Removing Toxic Metals from Water and SoilAngewandte Chemie International Edition, 2015
- The use of elemental sulfur as an alternative feedstock for polymeric materialsNature Chemistry, 2013
- Heterogeneous catalysis of the hydrodesulfurization of thiophenes in petroleum: an organometallic perspective of the mechanismAccounts of Chemical Research, 1988
- Sulfur in History: The Role of Sulfur in “Black Powder”1984
- Elemental sulfurChemical Reviews, 1976
- Color of liquid sulfurThe Journal of Physical Chemistry, 1971