Abstract
This work concludes our discussion of the image processing technique developed earlier for determination of specific impulse (Isp ) for Ablative Laser Propulsion (ALP). The plasma plumes are recorded with a time‐resolved intensified charge‐coupled device (ICCD) camera. The plasma was formed in vacuum (∼ 3×10−3 Torr) by focusing output pulses of a laser system (100‐ps pulsewidth at 532 nm wavelength and ∼35 mJ energy) on surfaces of C (graphite), Al, Si, Fe, Cu, Zn, Sn, and Pb elements. Angular profiles for integrated intensity and plasma expansion velocity were determined for the tested elements. Such profiles were used further for assessment of specific impulse. Specific impulses derived from angular distributions of plasma expansion velocity and integral intensity appeared in excellent agreement with the data derived earlier from force measurements.