Remediation of soil contaminated with arsenic, zinc, and nickel by pilot‐scale soil washing
- 9 September 2005
- journal article
- remediation
- Published by Wiley in Environmental Progress
- Vol. 25 (1) , 39-48
Abstract
The use of soil washing has successfully demonstrated bench‐scale and field applications for the remediation of oxyanions and cationic heavy metals. However, it is not easy to simultaneously remove both oxyanions and cations using one wash solution in the same extraction. Also contaminated soils from metal mining areas present other difficulties to remove contaminants because of their strong binding properties. Correspondingly, the efficiency of soil washing can be inhibited by the limited extraction of contaminants. The objective of this study was to find the optimal process conditions for the enhanced washing of recalcitrant contaminants. This study focused on the effectiveness of engineering‐scale washing of field soil using three types of inorganic acids (HCl, H2SO4, and H3PO4). In this study, soil contaminated with arsenic, nickel, and zinc was obtained from a closed iron/serpentine mining area. The H2SO4 and H3PO4 wash solutions, including the competitive oxyanion, enhanced the removal of arsenic. The acid attack on arsenic binding in the Fe/Mn oxide and organic/sulfides fractions may be a possible removal mechanism in addition to anionic competitive desorption. The low efficiency of soil washing results from the strong binding associated with minerals and the enrichment of contaminants in the highly reactive fine particles. For this soil used, the physical separation of particles could enhance the overall effectiveness of soil washing. Therefore, for the soils contaminated with recalcitrant contaminants in metal mining areas, the physical separation of fine particles can be significant in addition to the chemical extraction. © 2005 American Institute of Chemical Engineers Environ Prog, 2005Keywords
This publication has 14 references indexed in Scilit:
- Arsenic speciation and sorption kinetics in the As–hematite–humic acid systemColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Trace Elements in Terrestrial Environments2001
- A Model for Evaluating the Feasibility of an Extraction Procedure for Heavy Metal Removal from Contaminated SoilsWater, Air, & Soil Pollution, 1999
- Washing of Various Lead Compounds from a Contaminated Soil ColumnJournal of Environmental Engineering, 1998
- Certification of trace metal extractable contents in a sediment reference material (CRM 601) following a three-step sequential extraction procedureScience of The Total Environment, 1997
- Evaluation and Analysis of Soil Washing for Seven Lead-Contaminated SoilsJournal of Environmental Engineering, 1997
- DuPont soil washing technology program and treatment of arsenic contaminated soilsEnvironmental Progress, 1997
- Washing of Zinc(II) from Contaminated Soil ColumnJournal of Environmental Engineering, 1995
- Soil-washing technology and practiceJournal of Hazardous Materials, 1995
- Assessment of the phase selectivity of the European Community Bureau of Reference (BCR) sequential extraction procedure for metals in sedimentAnalytica Chimica Acta, 1994