Porous La-Fe-O Perovskite as Catalyst for Combustion of Volatile Organic Compounds
Open Access
Abstract
Porous nanocrystalline lanthanum perovskite La-Fe-O (LaFeO3) powders were synthesized by the sol–gel self-combustion method, using polyvinyl alcohol as the colloidal medium. The perovskite structure of the material, without secondary phases, was obtained at a calcination temperature of 900 °C for 40 min. The obtained powder was tested for catalytic activity at moderate temperatures (50–550 °C) for ethanol, methanol, acetone, benzene, and Pb-free gasoline vapors. Catalytic combustion begins at quite low temperatures (60–200 °C), compared to normal combustion, and this can be attributed to the nanometric crystallites, the large specific surface area, and the presence of iron cations with different valences, Fe3+/Fe2+, resulting from the method we used to obtain the material. The degree of conversion reaches values of over 99% for acetone and ethanol vapors at a temperature of 270 °C and 310 °C, respectively, and over 97% for methanol vapors at a temperature of 330 °C. The degree of conversion for Pb-free gasoline and benzene reaches somewhat lower values, over 88% at much higher temperatures, 470 °C and 550 °C, respectively. The lanthanum perovskite catalyst, LaFeO3, obtained by the presented preparation method, can be recommended for the combustion of acetone, ethanol, and methanol vapors. The performance of this catalyst is remarkable and can be compared to that of a catalyst containing noble metals in its composition.Keywords
This publication has 57 references indexed in Scilit:
- Supported ultralow loading Pt catalysts with high H2O-, CO2-, and SO2-resistance for acetone removalApplied Catalysis A: General, 2019
- Investigation on structural and electrical properties of FeMnO3 synthesized by sol-gel methodIonics, 2018
- Recent Advances in Novel Nanostructuring Methods of Perovskite Electrocatalysts for Energy‐Related ApplicationsSmall Methods, 2018
- Effect of metal oxides concentration over supported cordierite monoliths on the partial oxidation of ethanolApplied Catalysis B: Environment and Energy, 2014
- Nanostructured GdAlO3 perovskite, a new possible catalyst for combustion of volatile organic compoundsJournal of Materials Science, 2013
- Partial substitution of lanthanum with silver in the LaMnO3 perovskite: Effect of the modification on the activity of monolithic catalysts in the reactions of methane and carbon oxide oxidationApplied Catalysis A: General, 2008
- The formaldehyde sensitivity of LaFe1-xZnxO3-based gas sensorJournal of Materials Science, 2007
- Complete oxidation of ethanol over alkali-promoted Pt/Al2O3 catalystsApplied Catalysis B: Environment and Energy, 2006
- Cu- and Ag-Modified Cerium Oxide Catalysts for Methane OxidationJournal of Catalysis, 1998
- Ceramic sensors for humidity detection: the state-of-the-art and future developmentsSensors and Actuators B: Chemical, 1995