Fluid‐Integrated Glass–Glass Laminate for Sustainable Hydronic Cooling and Indoor Air Conditioning
- 19 July 2018
- journal article
- research article
- Published by Wiley in Advanced Sustainable Systems
- Vol. 2 (10)
Abstract
More than 20% of the global energy demands are caused by heating, ventilating, and air conditioning in buildings. In particular during summer seasons and in warm climates, cooling loads are mostly neutralized by conventional air‐conditioning systems. Due to often very low primary temperature, these require high energy input, cause significant noise, uncomfortably cool draughts, and vertical air temperature gradients. Here, an energy efficient planar cooling device for large area integration with building interiors is presented. The system is based on a thin glass–glass capillary element and enables indoor temperature conditioning with a very low temperature gradient. The cooling ability of the device is demonstrated on a prototype scale of ≈0.5 m2. Computational predictions based on the obtained results show that by implementing the present system in a 24 m2 office room located in Central Europe with a window to floor ratio of 0.42, the specific cooling load could reach up to 80 W m−2 in summer. This corresponds to an effective indoor air temperature reduction by up to about 15 °C. In comparison to other hydronic systems, the present device provides significantly more freedom regarding design, layout, and functionality of modern buildings.Keywords
Funding Information
- European Commission (GA 637108)
This publication has 40 references indexed in Scilit:
- Toward a quantitative model for suspended particle devices: Optical scattering and absorption coefficientsSolar Energy Materials and Solar Cells, 2013
- Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art reviewSolar Energy Materials and Solar Cells, 2010
- Cool materials and cool roofs: Potentialities in Mediterranean buildingsAdvances in Building Energy Research, 2010
- Electrically switchable chromogenic materials for external glazingSolar Energy Materials and Solar Cells, 2009
- Energy, environment and sustainable developmentRenewable and Sustainable Energy Reviews, 2008
- Opportunities and challenges in science and technology of WO3 for electrochromic and related applicationsSolar Energy Materials and Solar Cells, 2008
- Large-area smart glass and integrated photovoltaicsSolar Energy Materials and Solar Cells, 2003
- Photoelectrochromic windows and displaysNature, 1996
- Polymer-dispersed liquid crystals From the nematic curvilinear aligned phase to ferroelectric filmsLiquid Crystals, 1994
- Photochromism induced in an electrolytically pretreated Mo03 thin film by visible lightNature, 1992