Laser-Induced High-Strain-Rate Superplastic 3-D Microforming of Metallic Thin Films
Authors:
- 25 February 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 19 (2) , 273-281
Abstract
Microforming of metals has always been a challenge because of the limited formability of metals at the microscale. This paper investigates an innovative microforming technique: microscale laser dynamic forming (¿LDF), which induces 3-D superplastic forming in metallic thin films. This forming process proceeds in a sequence of laser irradiation and ionization of ablative coating, shockwave generation and propagation in metallic thin films, and conformation of metallic thin films to the shape of microscale molds. Because the deformation proceeds at ultrahigh strain rates, it is found that materials experience superplastic deformation at the microscale. In this paper, experiments are systematically carried out to understand the deformation characteristics of ¿LDF. The topologies and dimensions of the deformed samples are characterized by scanning electron microscopy and optical profilometry. The thickness variations are characterized by slicing the cross section of the deformed material using the focused ion beam. The magnitude of deformation depth in ¿LDF is determined primarily by three critical factors: film thickness, mold geometry, and laser intensity. The relationships between these factors are explored in process maps to find suitable processing conditions for ¿LDF. Nanoindentation tests are conducted to show that the strength of the thin films is increased significantly after ¿LDF.Keywords
This publication has 18 references indexed in Scilit:
- Deformation Behaviors and Critical Parameters in Microscale Laser Dynamic FormingJournal of Manufacturing Science and Engineering, 2009
- Critical review of analysis and interpretation of nanoindentation test dataSurface and Coatings Technology, 2006
- Scaling, dimensional analysis, and indentation measurementsMaterials Science and Engineering: R: Reports, 2004
- Process Design of Laser Forming for Three-Dimensional Thin PlatesJournal of Manufacturing Science and Engineering, 2004
- Microforming of Mems Parts with Amorphous AlloysMRS Proceedings, 1998
- Effect of velocity on flow localization in tensionActa Materialia, 1996
- Hyperplasticity: Increased forming limits at high workpiece velocityScripta Metallurgica et Materialia, 1994
- Measurement of Thin Film Mechanical Properties Using NanoindentationMRS Bulletin, 1992
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Analyses of Plastic Flow Localization in MetalsApplied Mechanics Reviews, 1992