Reconditioning of Diamond Coated Tools and Its Impact on Cutting Performance for CFRP Laminates
Open Access
- 26 January 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1288
Abstract
In recent years, CVD diamond-coated tungsten carbide (WC-Co) tools have been widely utilized due to their benefits in the machining of non-ferrous alloys and polymer composite materials, especially carbon-fiber-reinforced plastics (CFRPs). The reconditioning of such coated tools is economically attractive due to their high cost and short tool life. The decoating of the remaining diamond film from the used tools and the subsequent surface preparation by wet chemical pretreatment are essential steps for new CVD diamond film formation. Previously, it was shown that reactive ion beam etching (RIBE) could effectively remove CVD diamond films. However, some degree of WC-Co tool substrate damage is expected due to the high ion energy in RIBE and the chemical activity in wet etching. This study addresses the effects of RIBE decoating and surface pretreatment steps on WC-Co tools with a complex shape in terms of the ion-induced surface damage, geometry alteration, and adhesion of a subsequently re-applied CVD diamond film. Moreover, the cutting performance of the tools subjected to the RIBE decoating and repeated film deposition was studied via CFRP cutting tests. It has been shown that the RIBE decoated and recoated tools had a high level of cutting performance comparable to the new tools.Keywords
This publication has 31 references indexed in Scilit:
- Adhesion analysis and dry machining performance of CVD diamond coatings deposited on surface modified WC–Co turning insertsJournal of Materials Processing Technology, 2012
- Drilling tool geometry evaluation for reinforced composite laminatesComposite Structures, 2010
- Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminatesInternational Journal of Machine Tools and Manufacture, 2009
- Raman and conductivity studies of boron-doped microcrystalline diamond, facetted nanocrystalline diamond and cauliflower diamond filmsDiamond and Related Materials, 2008
- Ion source with closed drift anode layer plasma accelerationReview of Scientific Instruments, 2002
- Grinding of WC–Co hardmetalsWear, 2001
- Recycling technique for CVD diamond coated cutting toolsSurface and Coatings Technology, 2001
- Boron concentration dependence of Raman spectra on {100} and {111} facets of B-doped CVD diamondDiamond and Related Materials, 1998
- Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminatesInternational Journal of Machine Tools and Manufacture, 1997
- Diamond deposition on steel with CVD tungsten intermediate layerDiamond and Related Materials, 1995