A 212–260 GHz Broadband Frequency Multiplier Chain (×4) in 130-nm BiCMOS Technology
Authors:
- 7 June 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 454-457
Abstract
This paper presents a single-chip 240 GHz frequency multiplier chain in a 130 nm SiGe BiCMOS process. It consists of two balanced output doublers and an integrated high-gain high output amplifier. To enhance the output power, the output of the 212–260 GHz doubler adopts a current power combing architecture. The optimized second harmonic reflectors are introduced in the 212–260 GHz doubler to further increase output power without sacrificing the bandwidth. The first-stage wideband 120 GHz doubler cascaded with a driving amplifier is employed to drive the last-stage doubler with sufficient power. The measured peak output power is 5.5 dBm at 252 GHz, and the 3-dB bandwidth is from 212 GHz to 260 GHz. The proposed frequency multiplier chain consumes 270 mW DC power from a 3.3 V power supply. The peak DC-to-RF efficiency of the frequency multiplier chain is 1.4% corresponding to an 8% collector efficiency.Keywords
This publication has 5 references indexed in Scilit:
- 220–360-GHz Broadband Frequency Multiplier Chains (x8) in 130-nm BiCMOS TechnologyIEEE Transactions on Microwave Theory and Techniques, 2020
- A 280-325 GHz Frequency Multiplier Chain With 2.5 dBm Peak Output Power2019
- A Wideband SiGe BiCMOS Frequency Doubler With 6.5-dBm Peak Output Power for Millimeter-Wave Signal SourcesIEEE Transactions on Microwave Theory and Techniques, 2017
- A SiGe Multiplier Array With Output Power of 5–8 dBm at 200–230 GHzIEEE Transactions on Microwave Theory and Techniques, 2016
- 160–310 GHz frequency doubler in 65-nm CMOS with 3-dBm peak output power for rotational spectroscopy2016