Thermal Conductivity of NI HTS Coil Fabricated by Diffusion Bonding Technique
- 5 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-5
Abstract
The no-insulation (NI) winding technique shows superior thermal protection performance when quenching of a high- temperature superconducting (HTS) coil occurs compared to the insulation winding technique. However, the thermal conductivity of an NI HTS coil are not clearly known because the HTS tape has various surface conditions such as roughness and oxidation. In this study, the diffusion bonding technique was applied to predict the thermal conductivity of an NI HTS coil, and the core of this technique is to remove the interface between turns by applying Ag diffusion bonding. To investigate the thermal conductivity of an NI HTS coil, an NI HTS coil was fabricated using a diffusion bonding technique, and a stainless-steel 304 block was fabricated to verify the experimental results. The thermal conductivity of the NI coil was measured using a conduction cooling experimental apparatus by applying heat loads to the outside of the coil. The measured thermal conductivity was compared to the values calculated using the thermal resistance circuit at temperatures from 20 K to 77 K.Keywords
Funding Information
- Korea Electrotechnology Research Institute
- National Research Council of Science & Technology
- Ministry of Science and ICT, South Korea (21A01019)
- Korea Institute of National Research Foundation of Korea (NRF-2019R1A5A8083201)
This publication has 9 references indexed in Scilit:
- Fabrication of 1 m long multi layered superconducting coated conductor with high engineering critical current densitySuperconductor Science and Technology, 2020
- Controllability of the Contact Resistance of 2G HTS Coil With Metal InsulationIEEE Transactions on Applied Superconductivity, 2018
- Overall Thermal Conductance and Thermal Contact Resistance in No-Insulation REBCO MagnetIEEE Transactions on Applied Superconductivity, 2017
- Feasibility Study of a No-Insulation 1.5-T/600-mm All-REBCO Magnet for MRI SystemsIEEE Transactions on Applied Superconductivity, 2016
- The effects of co-wound Kapton, stainless steel and copper, in comparison with no insulation, on the time constant and stability of GdBCO pancake coilsSuperconductor Science and Technology, 2014
- Turn-to-turn contact characteristics for an equivalent circuit model of no-insulation ReBCO pancake coilSuperconductor Science and Technology, 2013
- HTS Pancake Coils Without Turn-to-Turn InsulationIEEE Transactions on Applied Superconductivity, 2010
- A THERMOHYDRAULIC-QUENCHING CODE FOR SUPERCONDUCTING MAGNETS IN NETWORK CIRCUITSAIP Conference Proceedings, 2010
- Thermal Conductivity of the ElementsJournal of Physical and Chemical Reference Data, 1972