Pore properties and moisture loss of repair mortars under low-impact microwave curing
- 24 April 2024
- journal article
- research article
- Published by Emerald Publishing in International Journal of Building Pathology and Adaptation
- Vol. 43 (4) , 749-765
Abstract
Purpose: Microwave curing (MC) can facilitate rapid concrete repair in cold climates without using conventional accelerated curing technologies which are environmentally unsustainable. Accelerated curing of concrete under MC can contribute to the decarbonisation of the environment and provide economies in construction in several ways such as reducing construction time, energy efficiency, lower cement content, lower carbonation risk and reducing emissions from equipment.Design/methodology/approach: The paper investigates moisture loss and pore properties of six cement-based proprietary concrete repair materials subjected to MC. The impact of MC on these properties is critically important for its successful implementation in practice and current literature lacks this information. Specimens were microwave cured for 40–45 min to surface temperatures between 39.9 and 44.1 °C. The fast-setting repair material was microwave cured for 15 min to 40.7 °C. MC causes a higher water loss which shows the importance of preventing drying during MC and the following 24 h.Findings: Portland cement-based normal density repair mortars, including materials incorporating pfa and polymer latex, benefit from the thermal effect of MC on hydration, resulting in up to 24% reduction in porosity relative to normal curing. Low density and flowing repair materials suffer an increase in porosity up to 16% due to MC. The moisture loss at the end of MC and after 24h is related to the mix water content and porosity, respectively.Originality/value: The research on the application of MC for rapid repair of concrete is original. The research was funded by the European commission following a very rigorous and competitive review process which ensured its originality. Original data on the parameters of porosity and moisture loss under MC are provided for different generic cementitious repair materials which have not been studied before. Application of MC to concrete construction especially in cold climates will provide environmental, economic and energy benefits.Keywords
This publication has 36 references indexed in Scilit:
- Microwave thermogravimetry as a tool to evaluate the drying of refractory castables – The effects of volumetric heatingCeramics International, 2023
- Industrial production of recycled cement: energy consumption and carbon dioxide emission estimationEnvironmental Science and Pollution Research, 2022
- Limestone addition effects on concrete porosityCement and Concrete Composites, 2016
- Porosity, pore structure and water absorption of polymer-modified mortars: An experimental study under different curing conditionsComposites Part B: Engineering, 2013
- Effect of brief heat-curing on microstructure and mechanical properties in fresh cement based mortarsCement and Concrete Research, 2009
- Pore structure of plain cement pastes hydrated at different temperaturesCement and Concrete Research, 1990
- Microwave curing technique in concrete manufactureCement and Concrete Research, 1987
- Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydrationCement and Concrete Research, 1985
- The effect of w/c ratio and curing temperature on the permeability of hardened cement pasteCement and Concrete Research, 1981
- Hardened Portland cement pastes of low porosity V. Compressive strengthCement and Concrete Research, 1972