Numerical Study on the Enrichment and Pressurization of Shale Gas in Horizontal Wells

Authors:

Abstract
Shale reservoir methane in-situ detonation-induced fracturing technology is a disruptive approach. Shale reservoir fracturing typically requires explosive pressures exceeding 100 MPa, necessitating an initial pressure of several megapascals (MPa) for the mixed gas (methane and oxygen) in horizontal wells. Consequently, the enrichment and pressurization process of shale gas within horizontal wells is a critical step for successful detonation fracturing. By using COMSOL simulation, numerical study on the enrichment and pressurization process of shale gas in a horizontal well was conducted under various scenarios. Results indicate that without pre-fracturing operations, achieving pressures of 2 MPa and 10 MPa in horizontal wells requires 2 days and 38 days, respectively. However, with pre-fracturing, these pressures are attained in just 5 hours and 4 days. Reducing the initial reservoir pressure significantly slows the pressurization rate in horizontal wells. The lower the initial pressure, the more pronounced the decline in pressurization efficiency. Higher numbers and larger apertures of natural fractures accelerate the pressurization rate. While the compressibility of natural fractures has a negligible impact on pressurization, higher compressibility values can slightly slow the process. Increasing the number, half-length, and aperture of artificial fractures, along with reducing their compressibility, enhances the pressurization rate. However, exceeding specific thresholds for these parameters (number, half-length, aperture) yields diminishing returns, with minimal further improvement in pressurization.

This publication has 11 references indexed in Scilit: