Strategy of Residual Stress Determination on Selective Laser Melted Al Alloy Using XRD
Open Access
Abstract
Selective laser melting (SLM) is known to generate large and anisotropic residual stresses in the samples. Accurate measurement of residual stresses on SLM-produced samples is essential for understanding the residual stress build-up mechanism during SLM, while a dramatic fluctuation can be observed in the residual stress values reported in the literature. On the basis of studying the influence of surface roughness on residual stress measured using X-ray diffraction (XRD), we propose a procedure coupling XRD technique with pretreatment consisting of mechanical polishing and chemical etching. The results highlight that residual stresses measured using XRD on as-built SLM-produced samples with high surface roughness are significantly lower than those measured on samples with finished surface, which is due to the stress relaxation on the spiked surface of as-built samples. Surface distribution of residual stresses and the effect of scanning strategy were systematically investigated for SLM-produced AlSi10Mg samples. Microstructural morphology was observed at the interface between sample and building platform and was linked to the surface distribution of residual stresses. This procedure can help us accurately measure the residual stresses in SLM-produced samples and thus better understand its build-up mechanism during the SLM process.Keywords
Funding Information
- National Natural Science Foundation of China (51971137, 51701120, 51301108, 11875192, U1930101)
- the national key Research and Development Program of China (2016YFB1100103)
This publication has 34 references indexed in Scilit:
- An overview of residual stresses in metal powder bed fusionAdditive Manufacturing, 2019
- Residual stress evaluation in selective-laser-melting additively manufactured titanium (Ti-6Al-4V) and inconel 718 using the contour method and numerical simulationAdditive Manufacturing, 2018
- Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulationAdditive Manufacturing, 2016
- Additive manufacturing of metalsActa Materialia, 2016
- Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titaniumActa Materialia, 2012
- Measuring Multiple Residual-Stress Components using the Contour Method and Multiple CutsExperimental Mechanics, 2009
- Residual stresses in selective laser sintering and selective laser meltingRapid Prototyping Journal, 2006
- Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a CutJournal of Engineering Materials and Technology, 2000
- Neutron diffraction measurement of the residual stress in the cementite and ferrite phases of cold-drawn steel wiresActa Materialia, 1996
- Determination of residual-stress variation with depth by the hole-drilling methodExperimental Mechanics, 1985